Tablesaw extension
#9
  
On my to do list for many years has been an extension table for my saw.

I finally got around to putting it together. The extension will bolt to existing holes in my fence and butt up against my outfeed table. It is made from poplar and melamine. The hardware is 1/4” bolts, nuts/washers, and t-nuts.

My objective today is to cut the mitre slots and get it mounted. I will post updates pics when it is complete.

Thanks for looking!


Attached Files Image(s)
   
   
   
PJ
Plympton, MA
Reply
#10
  Re: Tablesaw extension by pjohnson (On my to do list for...)
Complete. Added 48” after the blade


Attached Files Image(s)
   
PJ
Plympton, MA
Reply
#11
  Re: Tablesaw extension by pjohnson (On my to do list for...)
Looks good...........
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#12
  Re: Tablesaw extension by pjohnson (On my to do list for...)
Installed and ready to go.
It added 48” after the blade.


Attached Files Image(s)
   
PJ
Plympton, MA
Reply
#13
  Re: Tablesaw extension by pjohnson (On my to do list for...)
You're really going to enjoy that added expanse of flat table!  Looks great!
Reply
#14
  Re: Tablesaw extension by pjohnson (On my to do list for...)
Looks great. This is one of those things on my to do list as well.
Reply
#15
  Re: Tablesaw extension by pjohnson (On my to do list for...)
Nice, that's going to maker for easier/safer cuts.
Reply
#16
  Re: Tablesaw extension by pjohnson (On my to do list for...)
Lotta real estate there!

g
I've only had one...in dog beers.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.