Higher TS Fence
#17
  Re: Higher TS Fence by Halfathumb (The other day I need...)
Actually made several raised panels using the angled dado blade setup...but used my RAS for it as I did not own a TS at the time. Much easier to see and adjust the alignment with the RAS.The dado grooves as described above are a bit of a pain, and there is cross grain tearout as well...Using a horizontal router table has made it easier/better for me, but I haven't make that many panels in a while...
Reply
#18
  Re: Higher TS Fence by Halfathumb (The other day I need...)
Make a provision to bolt a tall piece of ply to the side of your fence.
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#19
  Re: RE: Higher TS Fence by Stwood_ (Make a provision to ...)
(02-13-2021, 07:48 PM)Stwood_ Wrote: Make a provision to bolt a tall piece of ply to the side of your fence.

One of the nice things about having a T slot(s) in a TS fence, easy to securely fasten aux fences and jigs.
Reply
#20
  Re: RE: Higher TS Fence by kurt18947 ([quote='Stwood_' pid...)
(02-14-2021, 04:37 AM)kurt18947 Wrote: One of the nice things about having a T slot(s) in a TS fence, easy to securely fasten aux fences and jigs.

Yes
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#21
  Re: Higher TS Fence by Halfathumb (The other day I need...)
This job with a hand plane is straightforward. No need for work arounds, jigs or exotic clamping solutions. Just plane the bevel, that's all there is to it. Sometimes hand tools are the quickest, most efficient way to get the job done and they produce excellent results.
Nice job, Jim.
Reply
#22
  Re: Higher TS Fence by Halfathumb (The other day I need...)
Many years ago there was an ugly jig thread here. I got high marks for a table saw fence jig I put together for cutting similar bevels on a table top. It went into the woodstove after serving it's purpose admirably.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.