Posts: 14
Threads: 0
Joined: Mar 2017
05-12-2021, 05:41 PM
(This post was last modified: 05-24-2021, 06:25 AM by Chipster2.)
Tormek sharpening system and accessories. I priced everything out (best as I can) on Amazon to get a baseline price. Those prices are listed below. - Tormek 2000 (later version is the T-8. That is priced on Amazon currently at $750. Because this is the older version, let's say 50% off the price for mine - $375
- Woodturners sharpening kit TNT-708. Amazon = $415
- Axe Jig SVA-170. Amazon = $25.95
- Knife Jig SVM-45. Amazon = $43
- Long Knife Jig SVM-140. Amazon = $63
Let's take 40% off of the accessories.
- Tormek @ $375
- TNT-708 at $249
- SVA-170 at $15.57
- SVM-45 at $25.80
- SVM-140 at $37.80
Total = $703.17. Let's call it an even $700. Price reduced to $600
I also have a Carter "Perfect Sphere" wood turning jig for sphere turning that I'd like to sell. Sadly, that never came out of the box. I was intending to do some epoxy / resin spheres. I find them fascinating!
Sorry there are no pictures. I don't know how to add them to a post. I can send picture via email if you are interested.
Harrison MI
Posts: 3,291
Threads: 0
Joined: Feb 2005
Location: Cleveland, OH
-just helping OP out by posting his pictures-
Posts: 14
Threads: 0
Joined: Mar 2017
05-15-2021, 05:26 PM
(05-15-2021, 05:14 PM)brnhornt Wrote: -just helping OP out by posting his pictures-
Thanks for the assist!
Posts: 364
Threads: 0
Joined: Jun 2013
Location: NW Indiana
Hey Chipster,
What are you looking to get for the Perfect Sphere, and what size lathe (swing) is the included post?
Thanks,
earl
Posts: 14
Threads: 0
Joined: Mar 2017
Posts: 14
Threads: 0
Joined: Mar 2017
Make me an offer, and I may surprise you!
Posts: 14,870
Threads: 10
Joined: Jan 2010
Location: southeastern VA
(05-26-2021, 08:33 PM)Chipster2 Wrote: Make me an offer, and I may surprise you!
I suspect that the issue is a concern over what it might cost to ship this.
Any idea what this would cost to ship to VA (say 23666)?
I suspect that West Coast shipping would probably be similar.
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
Posts: 217
Threads: 0
Joined: Dec 2003
Location: Arizona Desert
(05-26-2021, 08:56 PM)iclark Wrote: I suspect that the issue is a concern over what it might cost to ship this.
Any idea what this would cost to ship to VA (say 23666)?
I suspect that West Coast shipping would probably be similar.
Check y0our PM's
Posts: 13,416
Threads: 4
Joined: Jun 2007
Location: New Jersey
(05-26-2021, 08:56 PM)iclark Wrote: I suspect that the issue is a concern over what it might cost to ship this.
Any idea what this would cost to ship to VA (say 23666)?
I suspect that West Coast shipping would probably be similar.
Having shipped a lot of heavy stuff, my estimate is USPS would likely charge around $50-55 from Harrison MI to your zip (assuming 40lb weight); UPS tends to have better rates for heavier packages so they might be a tad cheaper..... which is not all that bad given the weight.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 14,870
Threads: 10
Joined: Jan 2010
Location: southeastern VA
(05-27-2021, 09:32 AM)dry heat Wrote: Check y0our PM's
did not receive one
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
