New/Old woodworking videos on YouTube
#91
Make this Turned Calculator project

Another great turning project from Dick Sing. This turned base really dresses up this calculator which in turn can dress up any desk. These make great gifts for everyone and you can really get creative with your designs!
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website. This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files


Cheers!
Chris DeHut

Note: I could not find the source for the calculator - if someone knows of a source, please post it in this thread. THANK YOU!
Reply
#92
Just wanted to say thanks for posting all of these videos.
I have watched all or almost all of the carving ones with David Reilly. Very well done.
Reply
#93
(03-22-2023, 10:07 AM)PossumDog Wrote: Just wanted to say thanks for posting all of these videos.
I have watched all or almost all of the carving ones with David Reilly. Very well done.

Hi PossumDog,  Thank you very much for the kind words and expression of appreciation!
Cheers!
Chris
Reply
#94
How to make Carved Pulls for your Cabinets

For a REALLY custom look on your cabinets and furniture, try your hand at a carved handle or pull. The drawer/door handle (pull) is the one object everyone will touch and feel on your cabinets. If you want your cabinet to stand out, take a look at this video and watch as David Reilly walks you through the process of carving this leaf shaped pull.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website. This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files


Cheers!
Chris
Reply
#95
Using Dial Calipers in the Wood Shop

Fine joinery requires tight fits and accurate cutting and more often than not, you are working in tolerances of a few thousandths of an inch. Many woodworkers get by on feel and intuition etc. However, for the rest of us, we use tools that help us measure to these accuracies. The dial (or digital) caliper is one such tool that not only measures, but is also a GREAT layout tool.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/

Cheers!
Chris
Reply
#96
How to Turn with Skews Part 1 of 2

Turning with skews is a challenge for all woodturners, especially the beginners. If you want to master the skew, watch this video. Dick Sing explains the techniques of how and why for skews.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/


Cheers!
Chris DeHut
Reply
#97
Make this Stool for Your Shop
Make this sturdy shop stool for your workshop. Features a comfortable solid wood seat that rotates, a foot rest that is at a comfortable height and a distinctive hand made look. Take a load off and spend more time COMFORTABLY in your shop.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/


Cheers!
Chris DeHut
Reply
#98
Serving Trays for a Fun Project
Learn how to make these attractive serving trays for your home. These are not only attractive, they are functional and show off a variety of your woodworking skills. Make some for yourself or better yet, make some as gifts to friends and family
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website.
This link will take you to that resource page… https://makingstuffwithchrisdehut.com/woodworking-files

Cheers!
Chris
Reply
#99
Is it worth it to upgrade CNC with Closed Loop Steppers?
After 6 months of use, was this update worth it? In Sept. 2022, I upgraded my CNC router with closed loop stepper motors and drives. This video answers the question "Was it worth it".


Cheers!
Chris DeHut
Reply
Making a Molding Plane Part 1 of 2

Molding planes are fantastic tools that are deeply imbedded in the traditions of woodworking. Making custom planes is certainly a skill serious woodworkers should consider learning. David Reilly walks you through the entire process in this two part video.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!

Resurrected from the Woodworking At Home Magazine. Supporting documentation for this video can be found on the companion website. This link will take you to that resource page… https://makingstuffwithchrisdehut.com/woodworking-files



Cheers!
Chris DeHut
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.