Router Bit Poor
#7
<p>I was straightening out my RB drawer and I discovered I have 14 trim bits (that's 1/2" shank) + 4 ea. 1/4" shanks.&nbsp;&nbsp; <img src="https://www.forums.woodnet.net/images/graemlins/yellowrolleyes.gif" data-sceditor-emoticon="
Rolleyes" alt="
Rolleyes" title="
Rolleyes"> </p><p>I've got to pay more attention to what I have and what I need to get.</p>
Jim
Reply
#8
I keep mine in the big clear plastic fishing tackle organizers. Easy to set on the bench and see what one has (or doesn't).

Ed
Reply
#9
I find it helpful to have duplicates and spares of the ones I use most. They seem to me to get really dull at the worst times, and having a backup is useful.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Reply
#10
At least you don't have a router for each kind of bit///////
Reply
#11
I drilled a bunch of 5/16" holes in a piece of 3/4" x 1-1/2" stock and inserted the 1/4" shanks in that and mounted it on a pegboard near my router station.

I drilled a bunch of 7/16" holes in a piece of 3/4" x 1-1/2" stock and inserted the 1/2" shanks in that and mounted it on a pegboard near my router station.

Since they are all out in the open it is easy to take a quick inventory.  I find it easier with a single line of bits for me to recognize the bit.  I used to have these on a sheet of MDF with holes drilled in and observe them that way (not mounted).  It is convenient to move around that way but misplacing all those bits is a concern.  I think I simply used long screws to mount it to the pegboard at close to eye level. 

I do have some Freud boxed bit set (raised door panels) and I keep them in the plastic boxes they came in.
No animals were injured or killed in the production of this post.
Reply
#12
<p>
(09-23-2021, 02:57 PM)Cooler Wrote: I drilled a bunch of 5/16" holes in a piece of 3/4" x 1-1/2" stock and inserted the 1/4" shanks in that and mounted it on a pegboard near my router station.

I drilled a bunch of 7/16" holes in a piece of 3/4" x 1-1/2" stock and inserted the 1/2" shanks in that and mounted it on a pegboard near my router station.

Since they are all out in the open it is easy to take a quick inventory.&nbsp; I find it easier with a single line of bits for me to recognize the bit.&nbsp; I used to have these on a sheet of MDF with holes drilled in and observe them that way (not mounted).&nbsp; It is convenient to move around that way but misplacing all those bits is a concern.&nbsp; I think I simply used long screws to mount it to the pegboard at close to eye level.&nbsp;

I do have some Freud boxed bit set (raised door panels) and I keep them in the plastic boxes they came in.

</p><p><br></p><p>I did something similar using 1/2" particle board that fits inside a drawer in the RT, but that was several years ago and I ran out of holes and to lazy to drill new ones. So I just laid the extra bits in the drawer. But I did correct my foolish ways the other day to allow for inventory expansion.&nbsp; <img src="https://www.forums.woodnet.net/images/graemlins/smirk.gif" data-sceditor-emoticon="
Smirk" alt="
Smirk" title="
Smirk">&nbsp;</p><p><br></p><p>Jim&nbsp;</p>
Jim
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.