01-05-2022, 12:02 AM
Another thing I was wanting to explore with my Shapekoko is how 3d (technically 2.5d) carving works with CNCs. Mostly software but also gets into selecting bits and the black hole of feeds-and-speeds.
Pretty happy with the way the carve worked. It could be faster and that's going to be a function of the feeds-and-speeds as well as the step-over I select for the finishing pass.
Poplar with a dark walnut stain.
Pretty happy with the way the carve worked. It could be faster and that's going to be a function of the feeds-and-speeds as well as the step-over I select for the finishing pass.
Poplar with a dark walnut stain.
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin