Worn Bandsaw Blades
#16
(04-22-2022, 10:39 PM)Cian Wrote: Any decent use for dull/worn-out bandsaw blades?

Or just toss ‘em?

I used about an 8" or 10" piece of a wide thick blade to make a thin parting tool for the wood lathe. I ground the teeth off and then ground a bevel on one end. It works great. I also used a short length of a narrower blade to make a replacement spring latch on belt guard for an older Delta bandsaw.
**********
Measure with a micrometer. Mark with Chalk. Cut with a chainsaw.
Reply
#17
(04-22-2022, 10:39 PM)Cian Wrote: Any decent use for dull/worn-out bandsaw blades?

Or just toss ‘em?

Scratch?

Small scraper?
Best,
Aram, always learning

"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery


Web: My woodworking photo site
Reply
#18
Give them, + your worn out saw blades, to a knife maker.
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#19
Scratch stock blades ... but the bandsaw blade ideally needs to be around 3/4" ...

[Image: ANewAngleOnScratchStock_html_m3146a7e1.jpg]

[Image: ANewAngleOnScratchStock_html_3070f0c5.jpg]



[Image: ANewAngleOnScratchStock_html_52773e96.jpg]

Regards from Perth

Derek
Articles on furniture building, shop made tools and tool reviews at www.inthewoodshop.com
Reply
#20
(04-22-2022, 10:39 PM)Cian Wrote: Any decent use for dull/worn-out bandsaw blades?

Or just toss ‘em?
I sharpen dull blades that have 3 or less TPI . I use a dremell tool with chainsaw grinding cylinders. I can sharpen a 113-1/2" blade formy 16" saw in about 20 minutes.Been doing this for many years.Before I used a Dremel tool I sharpened with a round 3/16" dia file. Worked fine but a bit tiring.
I can sharpen a 3/4" blade 4 or 5 times before tossing it. I won't go beyond 5 times as the blade gets metal fatigue. 
mike
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.