Carbide band saw blade sharpening service??
#11
Buying a used BS that comes with two used 1 1/4" carbide tipped blades. The seller doesn't remember where the blades were bought or what brand they are. The only markings I can find is "UDDEHOLM" etched into the band. Anyone know of a sharpening service that might sharpen them?

   

Thanks, Gary
I've only had one...in dog beers.

"You can see the stars and still not see the light"
The Eagles: Already Gone
Reply
#12
(04-25-2022, 06:40 PM)shoottmx Wrote: Buying a used BS that comes with two used 1 1/4" carbide tipped blades. The seller doesn't remember where the blades were bought or what brand they are. The only markings I can find is "UDDEHOLM" etched into the band. Anyone know of a sharpening service that might sharpen them?



Thanks, Gary

Try CT Saw.  The saw they sharpen carbide BS blades.  

John
Reply
#13
Thanks John,

Will check with them

Gary
I've only had one...in dog beers.

"You can see the stars and still not see the light"
The Eagles: Already Gone
Reply
#14
Be aware that depending on the material of the blade band, the diameter of the bandsaw wheels, and the thickness of the band itself (not the teeth), the bands may fatigue to the point of failure before a resharpened blade pays back the cost of sharpening.

Talk to your sharpener.  If I recall correctly, thick blades bending over small (under 18"-ish) diameter wheels are not recommended for sharpening.
You are frequently puzzled by things you tell us you fully understand. - Bob10 to EH 9/22/16

Too much has been made out of my mostly idle comments  - Cletus 12/9/15

You sound like one of those survivalist, hoarder, tin foil hat, militia, clinger, wackjobs.  - Fear Monger 1/30/13
Reply
#15
(04-26-2022, 09:03 AM)FireWood Wrote: Be aware that depending on the material of the blade band, the diameter of the bandsaw wheels, and the thickness of the band itself (not the teeth), the bands may fatigue to the point of failure before a resharpened blade pays back the cost of sharpening.

Talk to your sharpener.  If I recall correctly, thick blades bending over small (under 18"-ish) diameter wheels are not recommended for sharpening.

That's one reason I learned to resharpen my carbide bandsaw blade.  The Lennox Woodmaster CT I use costs about $175.  The cost to resharpen it is something like $75 by the time I pay shipping both ways.  If it breaks before I get about 50% more use out of it I loose.  But I can sharpen it for nearly nothing using little diamond embedded disks on a Dremel tool.  Any additional life I get is a bonus.  Both Derek Cohen and I have posted about how to sharpen carbide bandsaw blades.  

With the 1.3 tpi blade I use sharpening it takes less than 30 minutes, and it cuts like new again afterwards.  

John
Reply
#16
Had a discussion via text with Laguna, turns out these are resaw kings so I'll send them there. It's a 20 inch saw so there shouldn't be an issue with fatigue.

Thanks for the info!

Gary
I've only had one...in dog beers.

"You can see the stars and still not see the light"
The Eagles: Already Gone
Reply
#17
(04-26-2022, 02:09 PM)shoottmx Wrote: Had a discussion via text with Laguna, turns out these are resaw kings so I'll send them there. It's a 20 inch saw so there shouldn't be an issue with fatigue.

Thanks for the info!

Gary

It looked like a Resaw King in the photo.  I wonder who is private branding for whom?  FWIW, fatigue happens at all wheel diameters, increasing with decreasing diameter.  l 

John
Reply
#18
(04-26-2022, 06:10 PM)jteneyck Wrote: I wonder who is private branding for whom?  

John

John,
Uddeholm is a Swedish company that makes the steel band material for Laguna as well as many other saw blade manufacturers.

gary
I've only had one...in dog beers.

"You can see the stars and still not see the light"
The Eagles: Already Gone
Reply
#19
(04-26-2022, 09:28 AM)jteneyck Wrote: That's one reason I learned to resharpen my carbide bandsaw blade.  The Lennox Woodmaster CT I use costs about $175.  The cost to resharpen it is something like $75 by the time I pay shipping both ways.  If it breaks before I get about 50% more use out of it I loose.  But I can sharpen it for nearly nothing using little diamond embedded disks on a Dremel tool.  Any additional life I get is a bonus.  Both Derek Cohen and I have posted about how to sharpen carbide bandsaw blades.  

With the 1.3 tpi blade I use sharpening it takes less than 30 minutes, and it cuts like new again afterwards.  

John
...............
I posted my technique ~15yrs ago on this forum...I use a round diamond burr if the blade has round bottom gullets..a disc if they don't. They cut better than new and there used to be a Youtube video proving that statement. The poster rigged up a test on his bandsaw and filmed it...Can't find it now but it was very interesting.
Often Tested.    Always Faithful.      Brothers Forever

Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Upset





Reply
#20
(04-27-2022, 01:40 PM)Timberwolf Wrote: ...............
I posted my technique ~15yrs ago on this forum...I use a round diamond burr if the blade has round bottom gullets..a disc if they don't. They cut better than new and there used to be a Youtube video proving that statement. The poster rigged up a test on his bandsaw and filmed it...Can't find it now but it was very interesting.

I've been doing it myself for close to 10.  But I mostly use cheap blades.  Cutting blanks for turning with the bark (and dirt) on - you dull blades awfully quickly.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.