Grizzly Chuck Insert
#6
A friend gave me an old Grizzly 4 jaw chuck but it has no insert on the back. It looks like the female thread is about 1 5/8 (see pic) and my spindle is 1.25 x 8tpi. Any suggestions for a source for an insert?

Thanks,


Attached Files Image(s)
   
Reply
#7
I got mine from ONEWAY. Converts to 1X8TPI.
STRATFORD, ONTARIO, CANADA 519-271-7611 1-800-565-7288

GM
The only tool I have is a lathe.  Everything else is an accessory.
Reply
#8
Grizzly



https://www.grizzly.com/parts/grizzly-insert-1-1-4-8/ph6267003





Also that chuck is a  Vicmarc 100 Clone and Vicmarc 100 jaws and adapters will fit.
Life is what you make of it, change your thinking, change your life!
Don's woodshop
Reply
#9
https://www.woodturnerscatalog.com/search?term=Vicmarc+VM100+Jaws



Yes
Life is what you make of it, change your thinking, change your life!
Don's woodshop
Reply
#10
(06-11-2022, 01:20 PM)JoshDB Wrote: It looks like the female thread is about 1 5/8 (see pic) and my spindle is 1.25 x 8tpi. Any suggestions for a source for an insert?

There is a wide choice of inserts / adapters here: https://bestwoodtools.stores.yahoo.net/p...dwith.html
but you will need a better definition of your chuck's thread than "about 1-5/8".

I don't see the one you're looking for but talk to him. He might make it for you.
We do segmented turning, not because it is easy, but because it is hard.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.