pocket door question.. again..
#12
Terry W Wrote:I installed a Johnsons pocket door a few years ago. The one tip I will give you is to make sure the track is dead nuts level. Close enough is not close enough. If it's off by more than 1/8 inch, then the pocket doors will not stay closed, or not stay open. DAMHIK.
The soft-open and soft-close mechanisms will help with this, as the spring mechanism in them holds the door in the fully open or fully closed position. If the door was somewhere in between, gravity would make it move.

I don't know how easy it would be to add them as a retro-fit. Probably easier on the closed side than the open side, since it's accessible.

Tyler
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.