Posts: 196
Threads: 0
Joined: Mar 2022
After you have completed your final sanding, vacuumed off most of the excess dust, what do you clean with? Just a tack rag? Mineral spirits? Both? something else?
Thanks Greg
Sometimes it's better to keep your mouth shut, and have the world think you a fool, than to speak and remove all doubt.
Posts: 12,594
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
07-13-2022, 09:48 AM
(This post was last modified: 07-14-2022, 07:29 AM by fredhargis.)
I generally give it a wiping with MS, bu this is just as much to see if there are any glue spots and remaining sanding marks as anything.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 31
Threads: 0
Joined: Feb 2021
I just blow it off with compressed air and then a tack cloth.
Posts: 12,855
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
After vacuuming? Nothing.
John