CBN disc set for WorkSharp 3k

[nuk]

Lightly used set of CBN disks for WorkSharp 3000

- 80/180 CBN Work Sharp Disk
- 350/600 CBN Work Sharp Disk
- 800/1200 CBN Work Sharp Disk

There is a line on the 800 grit surface (shown in pic below), probably from the pores getting clogged from an older (soft) chisel.

Asking $100 USD shipped in CONUS (normally $150 new plus shipping, plus wait time @ https://woodturnerswonders.com/products/...s-set-of-3 )

Set of 3, with original boxes

   

800 grit side of the 800/1200 disk, showing the 'line'.

   

[HandyDandy]

Lightly used set of CBN disks for WorkSharp 3000

- 80/180 CBN Work Sharp Disk
- 350/600 CBN Work Sharp Disk
- 800/1200 CBN Work Sharp Disk

There is a line on the 800 grit surface (shown in pic below), probably from the pores getting clogged from an older (soft) chisel.

Asking $100 USD shipped in CONUS (normally $150 new plus shipping, plus wait time @ https://woodturnerswonders.com/products/...s-set-of-3 )

Set of 3, with original boxes


800 grit side of the 800/1200 disk, showing the 'line'.

[rambo2_981]

Have you tried Wonder Slick Stick to see if it cleans off the build-up on the 800?