Posts: 3,057
Threads: 0
Joined: Dec 2006
Location: Concord, NC
I want to build a 12x24 that will be moved onto a permanent foundation later...the plans I'm looking at call for 2x8 joist that only have support on the eges. That seems a lot easier to me. My question is whether or not that's sufficient or should I use 2x10s? I can't seem to find a chart that makes sense to me.
Thanks
https://myoutdoorplans.com/shed/12x24-ti...oft-plans/
"Life is too short for bad tools.".-- Pedder 7/22/11
Posts: 64,589
Threads: 3
Joined: Feb 2007
Location: Merryland
Are you building a tiny house?
Posts: 64,589
Threads: 3
Joined: Feb 2007
Location: Merryland
Are you building a tiny house?
Posts: 12,858
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(10-23-2022, 08:06 AM)Scott W Wrote: I want to build a 12x24 that will be moved onto a permanent foundation later...the plans I'm looking at call for 2x8 joist that only have support on the eges. That seems a lot easier to me. My question is whether or not that's sufficient or should I use 2x10s? I can't seem to find a chart that makes sense to me.
Thanks
https://myoutdoorplans.com/shed/12x24-ti...oft-plans/
This
reference suggests that would work at 16" OC.
John
Posts: 64,589
Threads: 3
Joined: Feb 2007
Location: Merryland
When you say support on the edges, do you mean using the rim joists as supports as opposed to sitting the joists on beams? Not the ideal way to build but you can. The rim joists would be doubled up for support.
Span and spacing charts for living spaces.
Posts: 4,613
Threads: 0
Joined: Jan 2008
10-23-2022, 09:41 AM
(This post was last modified: 10-23-2022, 09:43 AM by tomsteve.)
(10-23-2022, 08:06 AM)Scott W Wrote: I want to build a 12x24 that will be moved onto a permanent foundation later...the plans I'm looking at call for 2x8 joist that only have support on the eges. That seems a lot easier to me. My question is whether or not that's sufficient or should I use 2x10s? I can't seem to find a chart that makes sense to me.
Thanks
https://myoutdoorplans.com/shed/12x24-ti...oft-plans/
the way im reading this, youre going to have the structure supported around the perimeter. myself i would either go 12 O.C., move up to 2 by 10 16" o.c., or have a support beam down the center under the joists.
rule of thumb i was taught:
2 by 6 span 6'
2 by 8 span 8'
2 by 10 span 10'
2 by 12 span 12'
and build it bigger for jousting.
Posts: 3,057
Threads: 0
Joined: Dec 2006
Location: Concord, NC
(10-23-2022, 08:38 AM)Snipe Hunter Wrote: Are you building a tiny house?
Yes and no. I am gonna makeit a cabin type thing to stay in at times while my house is built on the land I have. After that, it will be a multi use building...eventually wired and insulated.
"Life is too short for bad tools.".-- Pedder 7/22/11
Posts: 3,057
Threads: 0
Joined: Dec 2006
Location: Concord, NC
(10-23-2022, 09:41 AM)tomsteve Wrote: the way im reading this, youre going to have the structure supported around the perimeter. myself i would either go 12 O.C., move up to 2 by 10 16" o.c., or have a support beam down the center under the joists.
rule of thumb i was taught:
2 by 6 span 6'
2 by 8 span 8'
2 by 10 span 10'
2 by 12 span 12'
and build it bigger for jousting.
Yes...banana fingers once again. I can take my 2x8s and 2x10s to the Renaissance Festival for joists and jousting.
"Life is too short for bad tools.".-- Pedder 7/22/11
Posts: 22,689
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
Pondering something similar, I decided on putting it on a cement slab and doing 9’ walls. I could add an insulated wood floor after if needed.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 3,057
Threads: 0
Joined: Dec 2006
Location: Concord, NC
(10-23-2022, 03:01 PM)blackhat Wrote: Pondering something similar, I decided on putting it on a cement slab and doing 9’ walls. I could add an insulated wood floor after if needed.
I want to move it when the rest of the land is cleared so a permanent foundation wouldn't work right now. As far as 9 foot walls, I plan on 10 foot one one side and 8 on the other.
"Life is too short for bad tools.".-- Pedder 7/22/11