Bandsaw blade advice
#14
(11-23-2022, 12:34 PM)DieselDennis Wrote: +1  

Crank that tension knob as tight as you can and watch your fingers.

um............................. NO !.......
No


If you do that you've bottomed out your spring and have eliminated all cushion in assembly which will lead to cracks and a trip to the scrap yard with your bandsaw.

NEVER fully tension a bandsaw.   NEVER !
Reply
#15
(11-22-2022, 08:17 PM)barryvabeach Wrote: +1 with John.   Though if the current blade is the one that came with the saw,  I would toss it.  The blade that came with my Grizzly was totatlly useless.

I'll bet the original Grizzly blade would work just fine as a nail finder
Big Grin. Beyond that though, maybe wall decoration?
Reply
#16
(11-30-2022, 12:16 PM)kurt18947 Wrote: I'll bet the original Grizzly blade would work just fine as a nail finder
Big Grin. Beyond that though, maybe wall decoration?

Too true.  Why they even put a blade on their saws is a mystery to me.  It makes an otherwise fine product appear incapable.  My amazing G0636X couldn't cut much of anything with the blade they put on it.  I made a couple of terrible cuts, took it off, and threw it away.  

John.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.