Putting the shooting board to work
#10
You may remember I developed a couple of different shooting boards earlier this year.  Today I used the bevel feature to shoot the ends of the aprons that wrap around a bench I'm working on.  

Here's the basic structure of the bench.  

[Image: AL9nZEW0h6Mftz1Pm01dYncbZv4BvMnbyNLeQluE...authuser=1]

The aprons wrap around that shelf on the top of the legs.  BTW, the bench is cherry veneer over plywood.  

I cut the apron pieces on my chop saw maybe 1/32" long and then tuned the final fit with the shooting board.  You get much cleaner surfaces off the shooting board.  

[Image: AL9nZEVzDzrj7bLimQ9gCUz7NfLJu9pn3Ol6n3uD...authuser=1]

The advantage of the tilting bevel over the donkey ear approach isn't obvious with this piece, but the long aprons are 59" long, a little hard to hold in good alignment against a donkey ear but easy on this shooting board, just add support for the outboard end and go to it w/o struggling.  And in case you forgot or didn't know, this shooting board can do any miter angle and most bevel angles, separately or in combination.  

Here's what it looks like on one end after shooting the miters.  

[Image: AL9nZEXa_T1pjyuRVVUtEuB8SFfilWhgA14tnT_N...authuser=1]

Thanks for looking.  I'll post something when the bench is done.  

John
Reply
#11
Well, from here, that looks perfect!!!!
"I tried being reasonable..........I didn't like it." Clint Eastwood
Reply
#12
Those miters came out great.
Reply
#13
Looks great John!
Reply
#14
I have one of John's shooting boards and I can attest to their accuracy and useability. The one board replaced 3 of my boards and was dead on in all its uses without any tweaking.

Cliff
‘The problem with the world is that intelligent people are full of doubts, while the stupid ones are full of confidence
Charles Bukowski
Reply
#15
Looks like that shooting board can do just about anything.  Nice work on it and the bench as well.
Reply
#16
(11-29-2022, 02:17 PM)stav Wrote: Looks like that shooting board can do just about anything.  Nice work on it and the bench as well.

Thanks.  I'm finishing the bench now.  

Yes, the shooting board can do almost anything related to miters and bevels.   You can learn more about it here:  Link  

I offer it, as well as a simpler version, for sale. 

John
Reply
#17
For some things you can't replace the accuracy of solid hand tool work - those corners are mighty pretty!
Eric Bruns
Licensed Psychologist
Aspiring amateur woodworker
Reply
#18
looks great!


...
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.