01-03-2023, 08:02 PM
The bench is 23 14 wide 941/2 long 34 3/4 high. If you stand on an anti- fatigue mat it is 34 1/2 height. The top is made of southern yellow pine and is 3 1/2 inches thick. The legs are somewhere around 3 1/2 by 4 inches and the frame is walnut. It includes 2 brass dogs, 2 Grammicy hold fasts, and Rockler bench rollers.
The wagon vise needs a handle and the ley vise hardware need to be let into the chop. The cop needs to be shaped to what every you want and fit to the top. The leg vise needs a handle also.
The criss-cross is made out of two pieces of 3/4 inch hickory. I have used the same set up on my other bench.
Asking $1200. Pick up preferred. If you want it shipped I will have to build a box and it will be about $450 to build the box plus actual truck shipping charges. The top lifts off, the rest just unbolts and will fit in a pickup truck. Open to other ideas like delivery if distance reasonable.
Thanks for looking
Tom
The wagon vise needs a handle and the ley vise hardware need to be let into the chop. The cop needs to be shaped to what every you want and fit to the top. The leg vise needs a handle also.
The criss-cross is made out of two pieces of 3/4 inch hickory. I have used the same set up on my other bench.
Asking $1200. Pick up preferred. If you want it shipped I will have to build a box and it will be about $450 to build the box plus actual truck shipping charges. The top lifts off, the rest just unbolts and will fit in a pickup truck. Open to other ideas like delivery if distance reasonable.
![](/images/resize.png)
![](/images/resize.png)
![](/images/resize.png)
![](/images/resize.png)
![](/images/resize.png)
![](/images/resize.png)
Thanks for looking
Tom