Posts: 232
Threads: 0
Joined: Apr 2006
I have turned a couple of rolling pins - normal rolling pins to be used in baking. I have done a couple in the past and have used Tried and True on them for a finish as it is food-safe. Before I start the finish process on these two, I thought I would reach out and see if others had a better or different option for a finish than T and T. Any suggestions you may have would be appreciated. Thanks in advance...FPT
Posts: 12,790
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(01-21-2023, 09:02 AM)fptahoe Wrote: I have turned a couple of rolling pins - normal rolling pins to be used in baking. I have done a couple in the past and have used Tried and True on them for a finish as it is food-safe. Before I start the finish process on these two, I thought I would reach out and see if others had a better or different option for a finish than T and T. Any suggestions you may have would be appreciated. Thanks in advance...FPT
Rubio Monocoat and Walrus Oil are food safe. Not sure about Odie's Oil, but also worth a look. All should be more durable than T%T. And then there always is mineral oil with paraffin dissolved in it. Not durable at all but really easy to maintain, as is RM by the way if ever needed.
John
Posts: 1,284
Threads: 0
Joined: Sep 2012
Location: Mobile, Alabama
Do they need to be finished? The only experience I have with this is rolling pins that have been purchased. The rollers appear to be unfinished maple and the handles are usually painted. When I see antique rolling pins, they don't appear to have ever had a finish.
Posts: 12,790
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(01-22-2023, 11:11 AM)Willyou Wrote: Do they need to be finished? The only experience I have with this is rolling pins that have been purchased. The rollers appear to be unfinished maple and the handles are usually painted. When I see antique rolling pins, they don't appear to have ever had a finish.
Probably not. The two I have aren't finished.
John
Posts: 863
Threads: 0
Joined: Jan 2007
Location: Fairfax Station, VA
I made a rolling pin recently and went with mineral oil, which has worked well but could probably use a reapplication (although not critical). When I researched at the time, it seemed like some of the commercial makers of similar rolling pins that I found online were using mineral oil.
Tyler
Posts: 12,790
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(01-22-2023, 04:50 PM)OneStaple Wrote: I made a rolling pin recently and went with mineral oil, which has worked well but could probably use a reapplication (although not critical). When I researched at the time, it seemed like some of the commercial makers of similar rolling pins that I found online were using mineral oil.
Tyler
I think that's because it makes them look nice for sale, not because they think it adds any real protection.
John
Posts: 4,519
Threads: 0
Joined: Jan 2008
01-22-2023, 10:02 PM
(This post was last modified: 01-22-2023, 10:04 PM by tomsteve.)
if you want anything on them, stick with food grade mineral oil or butcher block oil and just a light coat
Posts: 3,156
Threads: 1
Joined: Jan 2005
Location: Northern Ohio
(01-21-2023, 09:02 AM)fptahoe Wrote: I have turned a couple of rolling pins - normal rolling pins to be used in baking. I have done a couple in the past and have used Tried and True on them for a finish as it is food-safe. Before I start the finish process on these two, I thought I would reach out and see if others had a better or different option for a finish than T and T. Any suggestions you may have would be appreciated. Thanks in advance...FPT
Ever since I watched Peter Follensbee's spoon carving video, I've been using flaxseed oil on my wooden kitchen utensils. It can require up to a week to fully dry but it does dry, unlike the mineral oil I was using before.
And - bonus - I don't need to reapply it as often as mineral oil.
Note: Flaxseed oil is the same product as raw linseed oil except it's been processed in a food-safe manner. You can buy it at pharmacies, health food stores and on Amazon.
Posts: 36,467
Threads: 3
Joined: Nov 2004
Location: RTP, NC
I have made a few rolling pins as gifts and didn't finish them. That was on the advice of a sister who is a professional baker and a brother who is a talented but amateur cook. My sister commented that she had never seen a rolling pin with finish on it.
Posts: 169
Threads: 0
Joined: Oct 2019
Location: Monmouth County NJ
There is a guy on tiktok. He is also on youtube goes by Brad's Workbench. He makes a tung oil and wax finish called tung honey he sells it on Etsy. I have used it and love it. Works great. It does take a while to cure but it dries to the touch and handle within a day. Brad is from Texas and makes it out of his home.
https://www.etsy.com/listing/1098747676/...ef=hp_rv-2
“Ann: Do you exercise?
Ron: Yes. Lovemaking and woodworking.”