Day #1 at the Tractor Fest

[bandit571]

And spent a whopping $13.25, to boot...

   
$1 Chisel 1-3/4" width....Millers Falls "Buck Rogers No. 308 ( 3/8" chuck) $1....Stanley Handyman No. H1220 $1....both drills have drill points inside the handles

Next?

   
$5 for a canvas roll of brace bits...and...

   
Lufkin No. 456, 6" stainless steel caliper..$1

There was also a cloth roll to store chisels in...just the roll...$0.25..
Then there was this block plane...the oem cap was broken, but...a loose INTACT cap iron was in the tray with it..Paid $3 total..

   
Sargent No. 306 Adjustable mouth block plane...

Wasn't too bad a day, even IF half the vendors weren't even open on Friday....

So...anyone want to see what I passed on?

[MarkSingleton]

Sure we do! Good haul by the way.

[bandit571]

Ok..spread out over the 2 days I was down there...

   
A ring of F style clamps...

   
and..

   
and..

   
And on the end of the row of tables...

   
$10 Mitre box AND saw...out in front of these tables...

   
need a small drill press?

   
AND a vise for them?

   
Axes?

   
Broadly speaking?

   
BIG Pipe cutters, too..

Stay tuned...Part 2?

[bandit571]

Ok..where'd I leave off..

   
Didn't need any drawknives...already have a 6" and an 8" IN the shop..

   
This is where I picked that Sargent Block plane at...might have gotten the pick of the litter?

   
Axe heads and irons? hmmm...

   
Keep on file?

   
$40 set?   was a few "Gold Plated" things...too.

   
Box lots?

   
And, by the tub?

   
I spent the same amount for my 3 items, as I did for ONE bottle of water...

   
2 wire brushes, one steel, one brass...and a Great Neck No. 9 coping saw..with a real wood handle...

Brushes were put to work as soon as I got home...

   
As I cleaned up the Millers Falls No. 308 Buck Rogers Drill...the other drill is a No. 104 model...the 308 is 3/8"...the 104 is 1/4"...otherwise, the drills are the same.

Fest runs through Sept 4, 2023..and ends at dusk...

[Tony Z]

Looks like Heaven, to me, Bandit! Those Buck Rogers drills are pretty slick to use!

[Stwood_]

I've never seen that many open ended torque wrenches in one box.
And there is 2 line torque wrenches also.

[weedsnager]

Nice !

Where was this ?

[bandit571]

West Liberty, OH.....every Labor Day weekend....they have a Tractor Fest at the Lion's Club Park.....