Tools for Sale - Some Common, Some Discontinued

[Mainelywoodworking]

   

I'm finally finishing up my tool chest so I have a few items for sale. Most of the prices are my cost, so a little wiggle room. Shipping isn't included but I use PayPal / ShipStation / Pirate Ship so it shouldn't be too much. Any 2 items qualify for free shipping. I'm mostly listing these here in case I have something in particular you might have been looking for and want to avoid eBay mark-up because of fees/tax. More pictures if need of course. Thanks for looking.

Pending - Veritas 1/8” / 3mm Narrow plane blade for router and hinge mortise planes - new with chipped corner. $5
Pending - Halder BASEPLEX 25 mallet Nylon/cellulose acetate with zinc die cast housing - new. $16
Pending - Halder SIMPLEX 40 mallet TPE-mid/nylon with cast iron housing - uncommon faces - new. $33
Pending - Pegas #7 Skip tooth coping saw blades 6.5" / 18 TPI – 10 count - new. $5
- Gramercy Tools Carcase saw - American Black Walnut handle - 12" / 14 ppi - bought from another member and only made a few test cuts - $275
- Stanley Bailey No. 5 Type 13 Jack plane - SW iron. - $110
- Stanley No. 27 Transitional Jack plane - bought from another member. - $70
- 3/16” pig sticker mortise chisel. $40
- Lie-Nielsen No. 112 Large Scraping plane. $385
Pending - Pax card scraper - looks new. $5
- Staedtler Halfpipe compass - used but complete. $5
- Marples Adjustable Mortise gauge - brass inserts - walnut - bought new, never used but has marks from being in the shop. $45
- Marples Marking guage - brass inserts - walnut - same as above. $25

Sold - Stanley Bailey No. 3 Type 13 Smooth plane - SW iron. $80
Sold - Lie-Nielsen 2” replacement blade and chip breaker for Stanley planes – 0.095”. $110?
Sold - Hock Tools 2” replacement blade and chip breaker – O1 / high carbon steel - France? $60
Sold - Lee Valley Shingle and riving froe - tried once. $50
Sold - Diablo D0641 6-1/2in. x 40-Tooth Finish Trim Circular Saw Blade - new. $10
Sold - Bontz Saw Works Compact Joinery Mallet - mahogany handle - new with a small mark. $50
Sold - Lie-Nielsen Leather tool roll - older, better quality version - Made in France - $100?
Sold - Richard Kell Standard brass dovetail marker - new with some marks. $30
Sold - Lie-Nielsen No. 60-1/2 Low-angle block plane - bought new, never used but has marks from being in the shop. $165
Sold - Lie-Nielsen No. 60-1/2 Low-angle block plane blade – W1 steel so you can actually have a low angle - new. $50
Sold - Lie-Nielsen No. 102 Low-angle block plane blade – W1 steel like above - new. $45
Sold - Lie-Nielsen hand scraper set 0.020 / 0.032 high carbon Swedish tool steel - they look new. $15

[BC Woodworks]

I'll take the Veritas router plane blade. (Item 1)
Two hammers. (Items 2 and 3)
Pegasus coping blades. (Item 4)
Pax card scraper. (Item 13).