Mike and depth mike

[tablesawtom]

I have a Lufkin one inch mike. It is a ratchet fit or size. It has a veneer scale for reading in tenths of one thousands. Has all the fractional, decimal, conversions on the frame. It does not have carbide faces. I also have a Brown and Sharp, zero to 5inches depth mike. The base is 2 1/2 wide and the wood piece is included. The adjusting wrenches are under the depth mike in the wood flat. Asking $100 plus shipping.

   

   

   

   

Thanks for looking

Tom

[Snipe Hunter]

Mic... plus seventeen