Woodnet Forums

I recently acquired a 24" Keller dovetail jig. It came with the pro clamp kit and manual, but not the bits or the collet adjuster. I see myself doing mostly drawers with it, which means mostly stock that's 3/4" or less. Am I correct in thinking that I need the "small bit set" for this? Thanks!!

the small sized bits do dovetails from 3/8 to 3/4" on a 2401 jig 

make sure you order the 2401s2  Small Bit Set (#2433, 2443)     as it matters to the jig you are using 

Joe 

Thanks Joe!! You are a gentleman and a scholar, despite what those ne'er-do-wells in the basement say.

Nah, he's a ne'er-do-well, just also happens to be an ok guy too

(03-26-2017, 10:10 PM)DaveParkis Wrote: [ -> ]Thanks Joe!! You are a gentleman and a scholar, despite what those ne'er-do-wells in the basement say.

they talk about me in the basement  

Glad to be of assistance