|
Keller jig questions
|
03-26-2017, 10:18 AM
(This post was last modified: 03-26-2017, 11:42 AM by DaveParkis.)
I recently acquired a 24" Keller dovetail jig. It came with the pro clamp kit and manual, but not the bits or the collet adjuster. I see myself doing mostly drawers with it, which means mostly stock that's 3/4" or less. Am I correct in thinking that I need the "small bit set" for this? Thanks!!
Currently a smarta$$ but hoping to one day graduate to wisea$$
03-26-2017, 07:07 PM
the small sized bits do dovetails from 3/8 to 3/4" on a 2401 jig
make sure you order the 2401s2 Small Bit Set (#2433, 2443) as it matters to the jig you are using Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
03-26-2017, 10:10 PM
Thanks Joe!! You are a gentleman and a scholar, despite what those ne'er-do-wells in the basement say.
Currently a smarta$$ but hoping to one day graduate to wisea$$
03-26-2017, 11:09 PM
Nah, he's a ne'er-do-well, just also happens to be an ok guy too
Worst thing they can do is cook ya and eat ya
 GW
03-27-2017, 09:48 AM
(03-26-2017, 10:10 PM)DaveParkis Wrote: Thanks Joe!! You are a gentleman and a scholar, despite what those ne'er-do-wells in the basement say. they talk about me in the basement Glad to be of assistance
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
|
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
120 Degree Hinges 
5/16" Eyebolt 
Locking Swivel Casters 
T-Track