10-20-2019, 07:32 PM
10-20-2019, 09:40 PM
(10-20-2019, 07:32 PM)weelis Wrote: [ -> ]JUST A GENERA; QUESTION BUT WHAT ARE SOME OF Y'ALL S FAVORITE FINISHES FOR BLACK WALNUT? Small project and just trying to get some input. Thanx.
Tung oil, then orange shellac.
10-21-2019, 09:34 AM
(10-20-2019, 07:32 PM)weelis Wrote: [ -> ]JUST A GENERA; QUESTION BUT WHAT ARE SOME OF Y'ALL S FAVORITE FINISHES FOR BLACK WALNUT? Small project and just trying to get some input. Thanx.
Wiping varnish over very light coat of BLO. Arm-R-Seal or Waterlox for the varnish.
John
10-21-2019, 10:18 AM
wet sand with BLO/MS/Oil poly mix then top coat of oil base poly.
10-28-2019, 08:15 AM
Shellac looks good.
Best to just experiment and decide for yourself.
Best to just experiment and decide for yourself.
11-10-2019, 01:44 PM
(10-28-2019, 08:15 AM)rwe2156 Wrote: [ -> ]Shellac looks good.
Best to just experiment and decide for yourself.
I typically sand to 320 , apply one coat of minwax neutral followed by 3 to 6 coats of Sherman Williams LowVOC Lacquer, medium rub effect. I wet sand in between each coat with 400 wet dry and tack before spraying each coat with HVLP