+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Ever Framed a Cutting Board? (/showthread.php?tid=7351814)
Pages:
1
2
Ever Framed a Cutting Board? - Edwin Hackleman - 12-14-2019
I made three rectangular cutting boards using quartersawn white oak, 12" x 16". They are an inch thick and the grain is running vertically with 90 glued up pieces each. It seems that an outside wrap-around frame might set these boards off nicely, but it would have to be joined tightly, and I doubt mitered ends would be strong enough. If I make and attach frames, I'm, also not sure whether to use the same species or switch to another hardwood for a pleasant contrast.
Do you have any suggestions or Pics of your work? TIA.
RE: Ever Framed a Cutting Board? - MsNomer - 12-14-2019
Could you make the “frame” with boards oriented the same as the others?
RE: Ever Framed a Cutting Board? - Edwin Hackleman - 12-14-2019
(12-14-2019, 08:32 PM)MsNomer Wrote: Could you make the “frame” with boards oriented the same as the others?
Not really, Carolyn. These are all small boards with the grain running vertically -- 90 in all, glued up. It was quite a task. The technique was presented about 10 years or so ago in Wood magazine. The pattern of each row is staggered as you move along. I maintained the same species, white oak, but Wood showed several species in the same board for color contrast. I made three of those back then when the article was published. Needless to say, it's a lot of work but a rather unique project.
I can post a pic of where the project stands at this point without any outside frame if anyone is interested.
RE: Ever Framed a Cutting Board? - MsNomer - 12-14-2019
Pic would help.
Seventeen.
RE: Ever Framed a Cutting Board? - stoppy - 12-15-2019
Edwin, you wouldn’t happen to have that issue number of WOOD?
When I was turning I gathered several species of wood and now have leftovers that would fit a project like this. Personally I like the idea of the frame for a display board. Would love to see a pic of what you come up with.
RE: Ever Framed a Cutting Board? - Edwin Hackleman - 12-15-2019
(12-15-2019, 04:28 AM)stoppy Wrote: Edwin, you wouldn’t happen to have that issue number of WOOD?Stoppy, you can take a look here:
When I was turning I gathered several species of wood and now have leftovers that would fit a project like this. Personally I like the idea of the frame for a display board. Would love to see a pic of what you come up with.
https://www.lumberjocks.com/projects/283114
or
https://www.woodcraft.com/products/woodworking-project-paper-plan-to-build-end-grain-cutting-board
I made four very similar to this one. I used my 24" wide thickness sander. Once again I made three boards the same way with just one species -- white oak. Needless to say, it was a bear to sand smooth. White oak end grain is tough as nails.
RE: Ever Framed a Cutting Board? - BigD - 12-15-2019
(12-14-2019, 08:12 PM)Edwin Hackleman Wrote: I made three rectangular cutting boards using quartersawn white oak, 12" x 16". They are an inch thick and the grain is running vertically with 90 glued up pieces each. It seems that an outside wrap-around frame might set these boards off nicely, but it would have to be joined tightly, and I doubt mitered ends would be strong enough. If I make and attach frames, I'm, also not sure whether to use the same species or switch to another hardwood for a pleasant contrast.Check out this picture of one of my many end grain cutting boards. All pieces (interior & boarder) are end grain. I do not miter the frame. Look at the picture and you can see the butt joints. The interior pieces (the pattern) are maple, walnut and cherry. The interior boarder is 1/8" wide maple and the exterior boarder is 3/4" wide walnut.
Do you have any suggestions or Pics of your work? TIA.
Is this the information you are looking for?
[attachment=22285]
RE: Ever Framed a Cutting Board? - J-W-P - 12-15-2019
(12-15-2019, 04:28 AM)stoppy Wrote: Edwin, you wouldn’t happen to have that issue number of WOOD?
Issue 172 October 2006
RE: Ever Framed a Cutting Board? - Edwin Hackleman - 12-15-2019
(12-15-2019, 01:57 PM)BigD Wrote: Check out this picture of one of my many end grain cutting boards. All pieces (interior & boarder) are end grain. I do not miter the frame. Look at the picture and you can see the butt joints. The interior pieces (the pattern) are maple, walnut and cherry. The interior boarder is 1/8" wide maple and the exterior boarder is 3/4" wide walnut.Yes, BigD, and thank you. My only fear is that the cutting boards I just made will wind up hanging on the wall and never be used on the kitchen counter to cut any food. I've already given away to friends a half dozen cutting boards that wound on the wall, never to be used. Thanks again. Yours shown here is beautiful and truly a work of art.
Is this the information you are looking for?
RE: Ever Framed a Cutting Board? - fishhh4 - 12-15-2019
(12-15-2019, 04:00 PM)Edwin Hackleman Wrote: Yes, BigD, and thank you. My only fear is that the cutting boards I just made will wind up hanging on the wall and never be used on the kitchen counter to cut any food. I've already given away to friends a half dozen cutting boards that wound on the wall, never to be used. Thanks again. Yours shown here is beautiful and truly a work of art.
I wish mine would get used as well. I give them hoping they are put to use.
![[Image: w9yA8xwhlaee2PRbVx7ssBeoiQM8HfOwblgeTHv6...75-h945-no]](https://lh3.googleusercontent.com/w9yA8xwhlaee2PRbVx7ssBeoiQM8HfOwblgeTHv6QFfCeUk3KNJsON7lU8lWkgxhHUojL-Cs-f5pkOoWm3riyz6nOqkUkMiMGu7jjNZbeWq6zNNCiig16QR3FZ-Dg8JCnhzgwm4Rq0ldwgSPGDszXWY3qxeOSewBgur5tE36jtHUIxRfZ0LcpNW7acjhuEpq76JjhorFbk1cPYg2Rhk5aPlkVtFrV7UabUiBIUkCCfDLOxbUvVSHGBZptAOJW-YbtGKG_s1yBq_rmJuuND1aVsXkcKVbcXCBEX35wm-NPn8fErggFabilm_A-KHziW6CwOyExp66sczU9qpaYp9IFPNMA_qX7d4tyb4W785UIuJqzXq7r1jjJ6EcL40DPA_2IjLRtsvNRp-Cd46k2y259kc3tRKtaUvU_IrZABmAOH_fzgv68hhJP8lppXd5edNpPPz7waY_bWxQAmrHE_ds0oHqIPOvOThq25_lkeFRD8dX_j8zgxqvun6-4orpb7zqDCrnGkc5B3HGkK5f45LYOAcbdWpfzKqMAiUD8Bkcf1LgXByKEHW6XJj7oGiGuTxlvvdJz5yFR4T1eDFXWn3PPhmcU5UySb9xiXEbl1JYFBYO-JN-Bc2bYlHHfC5sojgGGzqF2QpCHOdrTXlAf1PmH4eVmpJeTyBouJFrOpKs_TacDMcz4gtw5cA=w1675-h945-no)