![]() |
Qualspray retainer ring size - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Qualspray retainer ring size (/showthread.php?tid=7322897) Pages:
1
2
|
RE: Qualspray retainer ring size - Rob Young - 09-21-2016 (09-21-2016, 03:10 PM)Snipe Hunter Wrote: Double check. The caps shouldn't be all the same. I've never seen that before. Some guns, I believe Apollo does this, have a cap that is the default for a range of N/N sets. But you can also mix-and-match the caps to the N/N to get different atomization and pattern effects. RE: Qualspray retainer ring size - jteneyck - 09-21-2016 They are the same size on my Qualspray gun. You may not have seen it, but it does exist. John RE: Qualspray retainer ring size - Snipe Hunter - 09-21-2016 (09-21-2016, 03:53 PM)Rob Young Wrote: Some guns, I believe Apollo does this, have a cap that is the default for a range of N/N sets. But you can also mix-and-match the caps to the N/N to get different atomization and pattern effects. That would be typical for most guns that came with more than one needle and tip. Usually a second cap would have bigger holes used with the larger needle and tip for thick stuff like primers. I've just never seen a gun shipped with two caps the same size. I guess it happens. RE: Qualspray retainer ring size - barryvabeach - 09-25-2016 I have the Asturo WB mini HVLP set, and it came with 3 diff needle and nozzles, but all 3 aircaps are the same. I read somewhere that the Asturo mini and the Qualspray are from the same maker |