+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: New shop space- Keep the wall or rip it down (/showthread.php?tid=7324144)
Pages:
1
2
RE: New shop space- Keep the wall or rip it down - Steve N - 10-23-2016
Yeah Mike, but this isn't about that
RE: New shop space- Keep the wall or rip it down - Foggy - 10-23-2016
(10-22-2016, 09:58 PM)mongo Wrote: Yes it can... just debating if I want to put the DC at the oposite end of the shop from the door.... would be nice to have it contained though.
Good idea but a sink and toilet are 2 steps into the home in the utilities room... good to go there.
(10-23-2016, 01:26 AM)p_toad Wrote: I saw what you did there...A sink in the shop can be handy. You can use it for dirty stuff you don't want in the house or for wash up when you are really dirty, and you won't have someone on your case if you leave it dirty.
RE: New shop space- Keep the wall or rip it down - Admiral - 10-23-2016
I vote to take it out and reclaim the sq footage. If you want to enclose a D.C., then do just that.
RE: New shop space- Keep the wall or rip it down - daddo - 10-23-2016
Painting booth with exhaust fan.
RE: New shop space- Keep the wall or rip it down - fredhargis - 10-24-2016
It's going to be hard to use a 4' wide space for storage, so I guess whatever your choices I wouldn't plan on that. But the DC/compressor thing may be good...otherwise I'd remove it and claim the space.
RE: New shop space- Keep the wall or rip it down - Dave Diaman - 10-24-2016
I would take out the majority of the wall but leave enough to house your dust collector and compressor.