+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: trying to cut unknown angle accuratly (/showthread.php?tid=7337270)
Pages:
1
2
RE: trying to cut unknown angle accuratly - ez-duzit - 02-12-2018
(02-11-2018, 06:56 AM)Snipe Hunter Wrote: I'm sure the guy with one post (quite possibly a spammer) who doesn't know how to cut an angle or what angle he has to cut owns a Japanese Saw.
For ~$40 the Japanese Razor saw is what I use daily. If the OP doesn't have one already, he should, and he will find many other uses for it.
https://www.japanwoodworker.com/products/10-3-4-cross-cut-razorsaw
RE: trying to cut unknown angle accuratly - paulmars - 02-12-2018
i did it. Trial and error on scrap.
RE: trying to cut unknown angle accuratly - Cooler - 02-12-2018
There are several good videos online showing how to transfer an angle using a sliding bevel square and a protractor. Most are under 2 minutes.
RE: trying to cut unknown angle accuratly - tomsteve - 02-12-2018
(02-12-2018, 08:14 AM)paulmars Wrote: i did it. Trial and error on scrap.
good on ya! and the simplest solution,too.