+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Securing seat slats (/showthread.php?tid=7345465)
Pages:
1
2
RE: Securing seat slats - jamesglenn - 01-06-2019
I built patio furniture and used glued ends with pocket holes on the underside. So far it has held up.
RE: Securing seat slats - Gary G™ - 01-06-2019
Depending on the Cedar type, it might be too soft.
I use Cypress for Adirondack chairs.
I only drill a single hole in each end of the seat slat.
I don’t see the need for 2 per end.
I make sure the hole is larger than the screw as well.