+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: End vise ??? (/showthread.php?tid=7374087)
Pages:
1
2
RE: End vise ??? - bandit571 - 10-25-2023
one could always build one of these?
[attachment=48622]
Fits into about any dog hole...
RE: End vise ??? - stav - 10-25-2023
(10-25-2023, 11:04 AM)bandit571 Wrote: one could always build one of these?
Fits into about any dog hole...
Is that yours? I don't remember seeing it in any of your builds.
RE: End vise ??? - bandit571 - 10-25-2023
Belongs to Lost Art Press...as it was on the end of one of the 7 benches there...
[attachment=48628]
And this was another bench...as for that pile of vises?
[attachment=48629]
One was in use, at the time I was there...
[attachment=48630]
In Covington, KY.
RE: End vise ??? - Bill Holt - 10-26-2023
(10-25-2023, 09:22 AM)rwe2156 Wrote: If I were building another bench, the end vise would either be a twin screw or Moxon.
Yes, yes, yes!!!
RE: End vise ??? - titanxt - 01-22-2024
I was too chicken to install a tail vise, but it would have been nice at times. I mainly use bench hooks, wedges and some stops and they serve all of my needs without the tail vise. Maybe a hint of old school goes with using them, which I like.
RE: End vise ??? - bandit571 - 01-25-2024
Mine, in use...
[attachment=49593]
But, I do tend to sit down on the job, anyway...
RE: End vise ??? - only 3 injuries - 01-27-2024
When I built my bench I wanted to see if I would miss having an end vise, and I don't.
For the times I really need something like a wagon vise a wonder dog works great.
RE: End vise ??? - Tapper - 02-06-2024
Built the workbench featured in Woodsmith #50 many years ago, my first and only. Don't do a ton of handwork but can't imagine not having a tail vise - YMMV.