(01-04-2024, 10:04 AM)crokett™ Wrote: my understanding is the return may prevent injuries from a strap or similar getting looped over the end of the rail and caught on the way up or down the stairs.

the new railing does return to the wall, and is the max cross section allowed so should meet code, if it were ever checked.  where I live though, I don't think that will be an issue.  beside which we aren't selling the house any time soon.

(01-04-2024, 01:11 PM)crokett™ Wrote: There is a matching rail on the wall.  

https://share.icloud.com/photos/08a8U58e...t-QUW2a1nQ

(01-04-2024, 01:26 PM)jteneyck Wrote: That is correct.  Railings must return to the wall at both the top and bottom to prevent clothing, etc from getting snagged.  

For others' benefit, railings must meet cross section requirements to be graspable, which is important if someone slips.  We all know the simple round, oval, or small rectangular handrails.  They must have a perimeter of at least 4 but no more than 6-1/4".  If the perimeter is greater than 6-1/4", then it must finger recesses in the sides to be deemed graspable.  The location and depth of those recesses are precisely defined by the code.  Do not assume all commercially available handrails meet code.  You see those big, beautiful railings in stately buildings.  Most don't meet code, which is why there is a smaller, often brass, handrail to the inside.  

I only know this stuff because I've built a couple of balustrades, and I didn't want to get it wrong.  In the one town I worked in the building inspector asked for a cross sectional cut of the railing once he learned I was custom making it.  Some of these folks do check.  That was a new build so the odds of them checking is much higher.  In another home I worked in, a remodel, I don't know if it ever came up when the home was sold a couple years after I installed the balustrade.  

John

(01-04-2024, 08:16 AM)Roly Wrote: Code .   Roly

(01-04-2024, 08:36 AM)Bill Holt Wrote: I'm wrong more often than being correct...but where I live, the "return to the wall" may be commercial.  I've installed several handrails without the return to the wall.  Who knows, I may be some "call backs" tomorrow.