+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Becksvoort Dovetails (/showthread.php?tid=7334352)
RE: Becksvoort Dovetails - Splinter Puller - 11-05-2017
I've belt sanded my dovetails smooth for decades. I think I started using the belt sander because of making dovetail drawers from baltic birch plywood. Regardless... I've learned to tame the "belt saw" and can't remember the last time I've sanded off a crisp corner or mucked up a project with it.
RE: Becksvoort Dovetails - Handplanesandmore - 11-06-2017
If you made dovetails out of plywood, you probably used a router jig. Why did you have to sand them as you could set the joints flush through the dovetail jig setting?
Simon
RE: Becksvoort Dovetails - EricU - 11-06-2017
I have been known to sand dovetails, but then again, I am nowhere near the woodworker that Becksvoort is. But I don't have a belt sander, I use a sanding block. I would probably dumb-thumb it if I did try to use a belt sander.
RE: Becksvoort Dovetails - FrankAtl - 11-07-2017
Seems everyone is getting hung up on the belt sander. I thought his approach to cutting dovetails was educational. I liked it!
RE: Becksvoort Dovetails - Tony Z - 11-08-2017
(11-07-2017, 08:56 AM)FrankAtl Wrote: Seems everyone is getting hung up on the belt sander. I thought his approach to cutting dovetails was educational. I liked it!
Me thinks many of us have screwed the pooch sometime in the past, using a belt sander!
RE: Becksvoort Dovetails - FrankAtl - 11-08-2017
(11-08-2017, 03:28 PM)Tony Z Wrote: Me thinks many of us have screwed the pooch sometime in the past, using a belt sander!
As have I!
RE: Becksvoort Dovetails - Steve N - 11-08-2017
Practice makes perfect, or you quit trying when you decide you can't operate a small handheld tool.
Where is the smirk, and run out of the room icon when ya need it
RE: Becksvoort Dovetails - Tony Z - 11-08-2017
A man (or a woman) gotta know their limitations....I don't like my decades old 4" X 24" Porter Cable belt sander for almost anything!
RE: Becksvoort Dovetails - FrankAtl - 11-08-2017
I know what you mean. I’ve screwed up a few things up with a belt sander.