+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Woodsmith's edge sander plans! (/showthread.php?tid=7345077)
RE: Woodsmith's edge sander plans! - ®smpr_fi_mac® - 12-23-2018
...just scored a 220V, 1725rpm, 2hp motor from my FIL.
So, yeah, this is gonna happen.
RE: Woodsmith's edge sander plans! - Stwood_ - 12-23-2018
(12-23-2018, 10:28 PM)®smpr_fi_mac® Wrote: ...just scored a 220V, 1725rpm, 2hp motor from my FIL.
So, yeah, this is gonna happen.
RE: Woodsmith's edge sander plans! - Wood'N'Scout - 12-24-2018
(12-23-2018, 08:03 PM)Stwood_ Wrote: Yes. Identical except for the switch and paint color.
I'd like to have full belt coverage. I think modifying the brackets under the table (maybe hinged) would give it the full tilt/angle.
I changed mine to 220V. Just a switch change was all that it needed, + a wiring change under the motor cover.
It came wired 120V
Based on my experience modifying the brackets under the table with piano style hinges would allow the flexibility to cover the entire belt. Actually I might do that also, it seems to be a pretty simple and inexpensive modification.
RE: Woodsmith's edge sander plans! - TDKPE - 12-24-2018
(12-16-2018, 12:12 PM)®smpr_fi_mac® Wrote: (calls for a 1hp, 3450rpm, 56 motor)
(12-23-2018, 10:28 PM)®smpr_fi_mac® Wrote: ...just scored a 220V, 1725rpm, 2hp motor from my FIL.
Soooooooooo, which speed is the correct speed?
3450 rpm sounds kind of fast even for a relatively small roller diameter.
RE: Woodsmith's edge sander plans! - Wood'N'Scout - 12-24-2018
(12-24-2018, 09:28 AM)TDKPE Wrote: Soooooooooo, which speed is the correct speed?
3450 rpm sounds kind of fast even for a relatively small roller diameter.
I have a belt/disc sander that came out of a school. It was 3 phase so I put a VFD on it. I've been running that sander at between 1000 and 1500 rpm with great success. It removes wood adequately, but is a heck of a lot more controllable.
It looks to me like cutting the speed in half would be a good starting point.
RE: Woodsmith's edge sander plans! - ®smpr_fi_mac® - 12-24-2018
I'm in Florida, so I don't have the magazine with me, but I think it called for a ~1725 motor.
Dunno why I originally posted the 3400 speed.