+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: "Difficult Grain"? (/showthread.php?tid=7378152)
RE: "Difficult Grain"? - bandit571 - 05-25-2025
Smoothed the panel..
[attachment=54711]
Removed the marks from the plane, with another plane..
[attachment=54712]
ends were square up..
[attachment=54713]
Then ripped to width...then a rebate was milled..
[attachment=54714]
Then a dry fit, to see how much to trim off the shelves..
[attachment=54715]
Once everything was fitted up..then the cussing could begin..
[attachment=54716]
Needed the bench vise to help hold things still, while I glued and clamped it all together...
[attachment=54717]
So...now I get to sit and peel dried glue off of me fingers....
Stay tuned..
