+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Help with design (/showthread.php?tid=7078388)
Help with design - msajeep - 08-19-2015
A customer asked me to build something similar to the link. I've come up with a drawing of my own but wonder how the dimensions/angles compare with what others think from looking at the picture. Mainly asking what you think the angle and dimension of the legs are? How much overhang on the end of the table from the legs?
Thanks
http://www.minwax.com/woodworking-inspiration/ideas-for-furniture/new-design-standard
Re: Help with design - Pirate - 08-19-2015
How about a bit thicker top?
Or maybe a skirt under the top?
Re: Help with design - msajeep - 08-20-2015
Top will be 5/4 stock
Also top is 8'x3'
Re: Help with design - Chuck Nickerson - 08-20-2015
Since it's supposed to be an upgraded picnic table, I'd start by finding picnic table plans and building a full-size prototype from BORG construction wood.
Re: Help with design - DaveR1 - 08-21-2015
Perhaps you just need to draw it out to get some decent perspective.
This was just a quick sketch so there's not much detail. The top is shown at 8 feet long by 3 feet wide and 1-1/4 in. thick. Legs are at 15° and the leg assembly is 12 in. from the end.
Re: Help with design - ianab - 08-21-2015
I'd just eye-ometer it. Sketch up some stuff that looks right.
Legs at 12 deg or 14? Meh?
Overhang is 3 inches or 4 inches? Doesn't matter....
That's the sort of stuff I build anyway. Get in there with some nice Doug Fir or whatever decent softwood you can find and build the thing.
Re: Help with design - DaveR1 - 08-21-2015
ianab said:
I'd just eye-ometer it. Sketch up some stuff that looks right.
Yep. That's what I did.
Re: Help with design - msajeep - 08-24-2015
Thanks guys
It's being built from red oak. Your dimensions were almost exactly what I came up with in my sketch. Only thing is they want benches on all 4 sides, so I need enough overhang for someone to sit there.
Re: Help with design - DaveR1 - 08-24-2015
It would be easy enough to move the legs toward the middle a bit more but you don't want to get too far in.
When you make the long benches, put the legs closer to the end. two reasons. First, so the thing doesn't spill the guy sitting on one end when the guy at the other end gets up. But also to keep the bench legs from colliding with the table legs when the benches are pushed in.
Re: Help with design - Dave Diaman - 08-24-2015
msajeep said:
Thanks guys
It's being built from red oak. Your dimensions were almost exactly what I came up with in my sketch. Only thing is they want benches on all 4 sides, so I need enough overhang for someone to sit there.
So they just want an indoor picnic table?