+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: T Bolts for Porter Cable Drill Press 17-925 (/showthread.php?tid=7153665)
T Bolts for Porter Cable Drill Press 17-925 - Pass Christian WW - 11-27-2015
I cannot seem to find the right square headed bolts for my Porter Cable Drill Press 17-925. The slot is slightly larger than 1" . I think I need a square head bolt that is not massive to fit in the slots. Does anyone have a source for these bolts? Thanks. Henry
Re: T Bolts for Porter Cable Drill Press 17-925 - Herb G - 11-27-2015
Try Graingers, McMaster Carr, or Fastenal. One of them should have what you're looking for.
Re: T Bolts for Porter Cable Drill Press 17-925 - museumguy - 11-27-2015
I couldn't find a square head bolt listed but most parts are listed, some are no longer available. Try this
http://www.ereplacementparts.com/delta-17925-type-drill-press-parts-c-3275_3279_3667.html
If you can find the part number, let us know, then we'll (I'll) see what I can find. Do you know the thread size, bolt length, etc...?
Re: T Bolts for Porter Cable Drill Press 17-925 - Axl - 11-27-2015
Bumper bolts. Google it.
Re: T Bolts for Porter Cable Drill Press 17-925 - handi - 11-27-2015
Don't forget to look into "Enco", they carry a lot of machinist's supplies.
Ralph
Re: T Bolts for Porter Cable Drill Press 17-925 - mike4244 - 11-28-2015
I made threaded inserts for a friends milling machine that would be similar to what you need for your DP.Measure the width and depth of the slot.Buy a short length of the correct width bar steel and cut to length.Probably 1" or so. Drill and tap for a bolt or better yet threaded rod.After the insert is tapped,Peen the bottom threads with a punch to prevent the rod from turning in deeper than the insert.
mike
Re: T Bolts for Porter Cable Drill Press 17-925 - Pass Christian WW - 12-05-2015
THanks to all that replied and especially Mike. I am a dummy. Should have thought of this earlier.