+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Need help with a chip breaker (/showthread.php?tid=7326035)
Need help with a chip breaker - Tynyyn - 12-08-2016
I have a Stanley #5 1/2 and I purchased a blade which was 2 1/4" wide. Would a 2" chip breaker work on the blade or would I need to get a 2 1/4" breaker?
Thanks
Terry
RE: Need help with a chip breaker - Bill_Houghton - 12-08-2016
Try it with a 2" breaker, and see how it works. But I would expect you to get chips caught in the gaps on each side.
If you use it mainly for edges, not as big a deal; but for working surfaces, more of a deal.