+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: First Turning (/showthread.php?tid=7326726)
Pages:
1
2
First Turning - Dara - 01-05-2017
Since high school some 40 odd years ago.
I picked up an old school model Atlas 12" lathe last year.
Got a couple chisels but didn't really do anything till I got a chuck.
Finally got one for Christmas so here we go.
A chunk of leftover red oak I had been saving for this purpose.
![[Image: IMG_1938_zpszxnxmcn8.jpg]](http://i167.photobucket.com/albums/u150/Dara2007/Mobile%20Uploads/IMG_1938_zpszxnxmcn8.jpg)
and turned it into a bowl in a hour or so
![[Image: IMG_1947_zpsurfmmcol.jpg]](http://i167.photobucket.com/albums/u150/Dara2007/Mobile%20Uploads/IMG_1947_zpsurfmmcol.jpg)
![[Image: IMG_1949_zpsl9mlvyro.jpg]](http://i167.photobucket.com/albums/u150/Dara2007/Mobile%20Uploads/IMG_1949_zpsl9mlvyro.jpg)
I didn't remove the flange for the chuck because I have a bunch to learn and was a but nervous.
RE: First Turning - daddo - 01-05-2017
I destroyed the picture I had of my first turning.
You need not do the same- that is a good job!
RE: First Turning - wood-chips - 01-05-2017
Thats a nice looking bowl.
The rings on the side are a nice accent.
RE: First Turning - Arlin Eastman - 01-06-2017
You did a swell job of it. Just think of what you will be doing in 5 years from now. Maybe segmented work or Art kind of turning or even just making nice bowls like the one you made there.
The grain is really nice in it too.
RE: First Turning - Dara - 01-06-2017
Thanks guys.
The rings are a bit rough and the sanding was difficult
I will try harden on the next one but I'm pretty happy with the first...a good learner.
Now I need to learn sharpening of tools
RE: First Turning - AHill - 01-06-2017
Great first bowl! You may want to attempt a jam chuck and turn off the foot, or, alternatively, saw off the foot using a Japanese saw and then carve or sand the bottom smooth. Be sure to sign and date your work. It only gets better from here!
Welcome to the turning vortex.
RE: First Turning - chips ahoy - 01-06-2017
As Alan said, welcome to the world of turning. Sharpening is very important and you will find it is easier to turn with sharp tools. Very nice looking bowl.Also as Alan said sign and date it, years from now you will see how much you have improved. Hope you have a good face shield,safety first. Congrats on the bowl.
Mel
RE: First Turning - Arlin Eastman - 01-06-2017
If we knew what city and state you were in we could send you to a close AAW club.
RE: First Turning - iclark - 01-07-2017
As others have said, that is an excellent first bowl. Also, you got it done a lot faster than most of us did on our first one. Good job!
To add to Arlin's suggestion, here is a link to the locator page for the
AAW clubs
Welcome back to the vortex.
RE: First Turning - Dara - 01-09-2017
Thanks guys.
Part of the reason I was scared to go further was I had a dig in when hollowing and it almost came out of the chuck.
I went right out a bought a face shield..gotta love HD gift cards for Christmas.
I do a lot of flat work and everything gets signed and dated, round stuff will be the same.
Can't wait to have time for the next one.