+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: cabinet door and router bit help/questions (/showthread.php?tid=7328689)
cabinet door and router bit help/questions - Wipedout - 03-13-2017
I need to help a friend with some cabinet work. I need to make a couple doors and some modeling and a cabinet extension. On the plus side it's all paint grade and going to be repainted when I'm done.
My questions are on how to match all the profiles. I've got a couple router tables at my disposal
Here are some pics of the existing I need to match, some of them look like v groove but they are rounded over.
Please let me know thoughts on how best to do the and what router bits you recommend. Thanks. Robert
1)[attachment=1632]
2)[attachment=1633]
3)[attachment=1634]
4)[attachment=1635]
5)[attachment=1636]
More pics in next post
RE: cabinet door and router bit help/questions - Wipedout - 03-13-2017
More pictures
6)[attachment=1637]
7)[attachment=1638]
8)[attachment=1639]
This appears to be standard crown
9)[attachment=1640]
RE: cabinet door and router bit help/questions - JGrout - 03-13-2017
point cutting roundover bits
60 degree vee groove bit
The cope and stick are 1/4 bead with a 1/4" groove
The raised panel is going to be a search unless someone has seen it as a router bit , that is a fairly standard shaper knife.
the outer door profile is also a shaper knife I think MCLS or eagle has a similar one
the crown does look standard you likely can pick some up at the borg
Joe
RE: cabinet door and router bit help/questions - Wipedout - 03-14-2017
Thanks Joe
Might have to rethink the doors.
RE: cabinet door and router bit help/questions - Stwood_ - 03-14-2017
Outer door profile is a 3 bead router bit, a profile I use. I'll post the whiteside number when I get around and out to the shop today.
RE: cabinet door and router bit help/questions - Wipedout - 03-14-2017
Thanks Stwood
RE: cabinet door and router bit help/questions - Stwood_ - 03-14-2017
Whiteside 6023
RE: cabinet door and router bit help/questions - Stwood_ - 03-14-2017
These people will beat any advertised price.
https://ballewsaw.com/whiteside-6023-door-edge-bit-1-3-4ld.html
RE: cabinet door and router bit help/questions - Wipedout - 03-15-2017
Thanks
Really appreciate it!
RE: cabinet door and router bit help/questions - Wipedout - 03-27-2017
Thanks for all the help Joe and STWood
They turned out close enough especially for paint grade
[attachment=1770]