+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: 60 degree cut on table saw (/showthread.php?tid=7329008)
Pages:
1
2
RE: 60 degree cut on table saw - Jack01 - 03-29-2017
(03-26-2017, 10:05 AM)JGrout Wrote: Stand the stock up vertically and the bevel to 30* and cut.
Backer block may be required depending on the length of the cut
[img=20x400]here is an example of the setup [/img]
![[Image: bevel%20cut_zpsas7v6fg4.jpg]](http://s243.photobucket.com/user/BCStudios/media/bevel%20cut_zpsas7v6fg4.jpg.html)
It worked.
I modified my Tenoning Jig. It was perfectly vertical to blade. Perfect 60 degree cuts. Thanks
Here is the picture.
![[Image: 33690045346_9ea6982fe4.jpg]](https://c1.staticflickr.com/3/2825/33690045346_9ea6982fe4.jpg)
" />