Keller jig questions - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Keller jig questions (/showthread.php?tid=7329010) |
Keller jig questions - DaveParkis - 03-26-2017 I recently acquired a 24" Keller dovetail jig. It came with the pro clamp kit and manual, but not the bits or the collet adjuster. I see myself doing mostly drawers with it, which means mostly stock that's 3/4" or less. Am I correct in thinking that I need the "small bit set" for this? Thanks!! RE: Keller jig questions - JGrout - 03-26-2017 the small sized bits do dovetails from 3/8 to 3/4" on a 2401 jig make sure you order the 2401s2 Small Bit Set (#2433, 2443) as it matters to the jig you are using Joe RE: Keller jig questions - DaveParkis - 03-26-2017 Thanks Joe!! You are a gentleman and a scholar, despite what those ne'er-do-wells in the basement say. RE: Keller jig questions - Steve N - 03-26-2017 Nah, he's a ne'er-do-well, just also happens to be an ok guy too RE: Keller jig questions - JGrout - 03-27-2017 (03-26-2017, 10:10 PM)DaveParkis Wrote: Thanks Joe!! You are a gentleman and a scholar, despite what those ne'er-do-wells in the basement say. they talk about me in the basement Glad to be of assistance |