+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Parts is..parts (/showthread.php?tid=7329401)
Pages:
1
2
Parts is..parts - bandit571 - 04-11-2017
Somewhere, in this pile of pine parts...
[attachment=1943]
Is a Saw Til......
Used a Mitre Saw to make the crosscuts..
[attachment=1944]
Ah, must be the Cordless version.....
Sides were a glue up..
[attachment=1945]
Because I wanted to get rid of some leftovers from the Table build. Made one glue up, and cut two sides out at an angle.
Glue joints needed a little work..
[attachment=1946]
Need to start some joinery this week, I guess. Had a lot of saws needing a place to hang out in...
RE: Parts is..parts - JimReed@Tallahassee - 04-11-2017
Great project. Saws love a till.
RE: Parts is..parts - bandit571 - 04-12-2017
Got a little bit done this afternoon...
[attachment=1956]
Wards 78 and the results..
[attachment=1957]
Glued up the kerf board to the backer board
[attachment=1958]
layout toys, and my "dovetail saw"
[attachment=1959]
Chopped a bit..
[attachment=1960]
Then the flip side work. top piece for the two sides was also done.
No A/C in the shop, I am soaked, and tired out, time to take a break....
Stay tuned, the cussing has begun...
RE: Parts is..parts - JimReed@Tallahassee - 04-12-2017
Love the bench. I can almost smell turpentine...
RE: Parts is..parts - bandit571 - 04-13-2017
More dovetails..
[attachment=1966]
Doing pins first. Then set things up to trace around the pins..
[attachment=1967]
Chopped the tails, dry fit the sides, top and bottom..
[attachment=1968]
To see how things will fit.
Spread a bit of glue around today...
[attachment=1969]
And shaped the handle rest with a spokeshave, a Millers Falls No. 56B plane and some sandpaper..
[attachment=1970]
Nice and round to hold the handles in place. later this evening, I might try to add a back to the til.....we'll see....
RE: Parts is..parts - bandit571 - 04-14-2017
[attachment=1989]
PIP, anyone?
Floor show.....
Ok, when you walk down the steps to the Dungeon Shop, this is what you will see..
[attachment=1990]
Then, the view from the bench area..
[attachment=1991]
A place to hold the "horns" of the saw's handles..
[attachment=1992]
Still needs a finish on the wood works....maybe later?
Smaller saws hang from pegs in the side of the til.....
I guess this will just have to do, for now....
RE: Parts is..parts - Tynyyn - 04-14-2017
got some rough measurements? or did you just build it to fit the length of the saws?
RE: Parts is..parts - bandit571 - 04-14-2017
Used what scraps I had, and used a saw to help lay things out.
IF you want, I can get some measurements later tonight, and post them here...
RE: Parts is..parts - BrokenOlMarine - 04-14-2017
Very nice
RE: Parts is..parts - John Clifford - 04-14-2017
Looks good and very useful. Thanks for posting.