Posts: 3,718
Threads: 0
Joined: Nov 2010
Somewhere, in this pile of pine parts...
Is a Saw Til......
Used a Mitre Saw to make the crosscuts..
Ah, must be the Cordless version.....
Sides were a glue up..
Because I wanted to get rid of some leftovers from the Table build. Made one glue up, and cut two sides out at an angle.
Glue joints needed a little work..
Need to start some joinery this week, I guess. Had a lot of saws needing a place to hang out in...
Show me a picture, I'll build a project from that
Posts: 6,562
Threads: 2
Joined: Sep 2006
Location: North Florida
Great project. Saws love a till.
===---===---===---===---===---===---===---===---
Please visit my website
splintermaking.com
Posts: 3,718
Threads: 0
Joined: Nov 2010
Got a little bit done this afternoon...
Wards 78 and the results..
Glued up the kerf board to the backer board
layout toys, and my "dovetail saw"
Chopped a bit..
Then the flip side work. top piece for the two sides was also done.
No A/C in the shop, I am soaked, and tired out, time to take a break....
Stay tuned, the cussing has begun...
Show me a picture, I'll build a project from that
Posts: 6,562
Threads: 2
Joined: Sep 2006
Location: North Florida
Love the bench. I can almost smell turpentine...
===---===---===---===---===---===---===---===---
Please visit my website
splintermaking.com
Posts: 3,718
Threads: 0
Joined: Nov 2010
More dovetails..
Doing pins first. Then set things up to trace around the pins..
Chopped the tails, dry fit the sides, top and bottom..
To see how things will fit.
Spread a bit of glue around today...
And shaped the handle rest with a spokeshave, a Millers Falls No. 56B plane and some sandpaper..
Nice and round to hold the handles in place. later this evening, I might try to add a back to the til.....we'll see....
Show me a picture, I'll build a project from that
Posts: 3,718
Threads: 0
Joined: Nov 2010
PIP, anyone?
Floor show.....
Ok, when you walk down the steps to the Dungeon Shop, this is what you will see..
Then, the view from the bench area..
A place to hold the "horns" of the saw's handles..
Still needs a finish on the wood works....maybe later?
Smaller saws hang from pegs in the side of the til.....
I guess this will just have to do, for now....
Show me a picture, I'll build a project from that
Posts: 795
Threads: 0
Joined: Dec 2016
got some rough measurements? or did you just build it to fit the length of the saws?
Posts: 3,718
Threads: 0
Joined: Nov 2010
Used what scraps I had, and used a saw to help lay things out.
IF you want, I can get some measurements later tonight, and post them here...
Show me a picture, I'll build a project from that
Posts: 11,447
Threads: 1
Joined: May 2014
Location: South Central Oklahoma
Very nice
Jim in Okie
You can tell a lot about the character of a man -
By the way he treats those who can do nothing for him.
Posts: 2,331
Threads: 0
Joined: Nov 2005
Looks good and very useful. Thanks for posting.
"When I nod my head, hit it." - M. Howard.
"I think you should learn how to use hand tools before you even touch a power tool." - Sam Maloof
