+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Elmer's to the rescue (/showthread.php?tid=7330253)
Pages:
1
2
Elmer's to the rescue - Cooler - 05-16-2017
I was watching an episode of "Cars that Rock" on Velocity. They were going over the history of Rolls Royce.
In once scene they were showing a craftsman (a woman, actually) repairing a piece of wood that would be used for the dashboard of a car. She had cut a sliver of wood and was fitting it to the body of the wood to repair a void. She was holding a small squeeze bottle of adhesive and it was clearly Elmer's glue to affix the sliver in place. When it was dry she was shown sanding it smooth to the surface of the wood.
I'm sure that her repair was invisible when finished. I was surprised that they were using such a low tech adhesive.
I went on line to see if Elmer's sold any industrial glues were packaged in that very small squeeze bottle and I could find none.
You'd think that Rolls Royce would be using a more sophisticated adhesive (or even a better quality one). Maybe it is chosen because it dries clear?
RE: Elmer's to the rescue - JGrout - 05-16-2017
white PVA may well be the salvation and solution to many restoration workers.
it is poo pah'ed by many but the advantage is the short open time the quick grab and the ability to sand clean in short order
RE: Elmer's to the rescue - Chuck Nickerson - 05-16-2017
I have also read (no experience) that Elmer's white glue flexes and moves more easily than yellow glue.
Given all the flexing auto components can experience that might be a factor as well.
RE: Elmer's to the rescue - Cooler - 05-16-2017
I'm sure it is a perfectly satisfactory product for this application. But how many Woodnet members still use white glue? It seemed so low tech.
RE: Elmer's to the rescue - JGrout - 05-16-2017
(05-16-2017, 03:47 PM)Cooler Wrote: I'm sure it is a perfectly satisfactory product for this application. But how many Woodnet members still use white glue? It seemed so low tech.
I still use in for certain projects.
It is great for laying a base adhesive coat on veneer to heat set the veneer to a substrate.
RE: Elmer's to the rescue - Arlin Eastman - 05-16-2017
I have used it before and like it for the things I use it for. 2/3s the time I use Titebond original but the other times I use Elmer's which is very easy to work with.
RE: Elmer's to the rescue - Steve N - 05-16-2017
(05-16-2017, 03:47 PM)Cooler Wrote: I'm sure it is a perfectly satisfactory product for this application. But how many Woodnet members still use white glue? It seemed so low tech.
Frank Klausz only uses Elmers white Roy Underhill has called him the best woodworker in America. If you have ever talked to Frank you may wonder about the American part
He's Hungarian, transplanted to America, and his English is pretty accented.Franks Shop.
RE: Elmer's to the rescue - Cooler - 05-17-2017
There was a local artist that often painted those seasonal scenes on storefront windows similar to the one below. She used acrylic paints which would scratch off very easily. To protect the image she would paint over the acrylic with Elmers, which dried clear and shielded the paints. Back then she said that nothing else worked quite as well and still scraped off with a razor blade.
![[Image: b803952efe47f2c8eba26d1029e0b6cf.jpg]](https://s-media-cache-ak0.pinimg.com/736x/b8/03/95/b803952efe47f2c8eba26d1029e0b6cf.jpg)
RE: Elmer's to the rescue - Johneone - 05-17-2017
I use liquid hide glue most of the time, but when I use a pva glue it's elmers. If it's good enough for Frank Klaus it's good enough for me. Over the last 30 years I've used most pva glues and none have ever failed, so I use the cheapest.
RE: Elmer's to the rescue - Steve N - 05-18-2017
(05-17-2017, 10:48 PM)Johneone Wrote: Elmer's, If it's good enough for Frank Klaus it's good enough for me. Over the last 30 years I've used most pva glues and none have ever failed, so I use the cheapest.
Pretty well sums me up, and I do sometimes use hide glue too