+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: On the way to buy some screws.... (/showthread.php?tid=7330476)
Pages:
1
2
On the way to buy some screws.... - bandit571 - 05-26-2017
I found the ONLY Garage Sale in town...of course, I just had to stop in.......walk and around, and haggle a bit..
$4 handsaws? When I already have 20+? $4 hammers? Meh......found a wide chisel, no price tape on it,,,,,$1? Sold!
Not just any old, wide chisel...this was "special"....
[attachment=2404]
2" wide......was so good, it had been "Mushroomed" twice..
[attachment=2405]
First one stayed on. There was even a wooden plug in the end.
Got rid of the mushrooms, reground the curved edge back to a straight line across. Needed to find a handle for it, since I went and dug out that plug...
[attachment=2406]
I found an old Harbour Freight lathe chisel......had it "donate" the handle. Had to form the end to fit in the socket.
Flattened the back..
[attachment=2407]
Honed the edge to 1K grit, for now.....might just have a Slick for the shop...
[attachment=2408]
Just a dollar chisel....counting the handle, this is about 19" long. Might be a keeper?
RE: On the way to buy some screws.... - cwarner - 05-26-2017
Nice save! My hands down favorite chisel shared the same story. I found it in a metal bucket kept outdoors with a bunch of other scrap metal. Mushroomed badly and rusted. I cleaned it up and a member here turned me a new handle. After its first use it became hands down my favorite chisel to use. It's a 1 1/4" firmer chisel but something about that old steel feels great in the hand. Enjoy!
RE: On the way to buy some screws.... - Timberwolf - 05-26-2017
(05-26-2017, 12:26 AM)bandit571 Wrote: I found the ONLY Garage Sale in town...of course, I just had to stop in.......walk and around, and haggle a bit............................
$4 handsaws? When I already have 20+? $4 hammers? Meh......found a wide chisel, no price tape on it,,,,,$1? Sold!
Not just any old, wide chisel...this was "special"....
2" wide......was so good, it had been "Mushroomed" twice..
First one stayed on. There was even a wooden plug in the end.
Got rid of the mushrooms, reground the curved edge back to a straight line across. Needed to find a handle for it, since I went and dug out that plug...
I found an old Harbour Freight lathe chisel......had it "donate" the handle. Had to form the end to fit in the socket.
Flattened the back..
Honed the edge to 1K grit, for now.....might just have a Slick for the shop...
Just a dollar chisel....counting the handle, this is about 19" long. Might be a keeper?
That missing handle and mushroomed socket is the reason God invented Epoxy...Glue 'em in and foget about it !!!!! Help stamp out orphaned chisels!!!!
RE: On the way to buy some screws.... - TomFromStLouis - 05-26-2017
CAUTION!!!
Chisel salvaging vortex dead ahead!
It is possible that you find yourself accumulating large batches of cheap chisels to assemble not one but two complete sets of fine old steel with newly turned handles. No woodworking will be accomplished during this period of very satisfying rehab work. Building a chisel rack will become a priority. DAMHIKT
![[Image: thewholegroup.jpg]](http://i176.photobucket.com/albums/w188/SirDoofus/chisels/thewholegroup.jpg)
ps - Jack is right about epoxy and shortened sockets
RE: On the way to buy some screws.... - Tynyyn - 05-26-2017
I hate your guts. I've been to oodles and boodles of flea markets around NW Arkansas and STILL haven't found ONE rusted slick. You guys in the north west and north east just suck for having such good luck.
Grrrrrrrrr..........
RE: On the way to buy some screws.... - toolmiser - 05-26-2017
I also find that chisel accumulating can become a problem. They can be cheap, and neat way to get some lathe time and empty out the scrap bin. I also look for nice wide leather belts at garage sales to use for the "padding" on the handles. It's kind of fun coming up with handle designs, and I've had some that just didn't work out and become fire wood. Then there is all of that sharpening to be done!
RE: On the way to buy some screws.... - Jim Waldron - 05-28-2017
That's slick. But when do we get to see those screws? Or did you forget in all the excitement? (That's how I always exhibit my senior status.)
RE: On the way to buy some screws.... - Stwood_ - 05-28-2017
(05-26-2017, 12:09 PM)TomFromStLouis Wrote: CAUTION!!!
Chisel salvaging vortex dead ahead!
It is possible that you find yourself accumulating large batches of cheap chisels to assemble not one but two complete sets of fine old steel with newly turned handles. No woodworking will be accomplished during this period of very satisfying rehab work. Building a chisel rack will become a priority. DAMHIKT
ps - Jack is right about epoxy and shortened sockets
Looks similiar to my stash of Buck chisels that I sold off.
(05-28-2017, 12:19 PM)Jim Waldron Wrote: That's slick. But when do we get to see those screws? Or did you forget in all the excitement? (That's how I always exhibit my senior status.)
Yes. Forgot about his screw problem after finding that slick.
RE: On the way to buy some screws.... - jppierson - 05-28-2017
So how do you get rid of the mushroom? Cut it off, or re-form so how?
RE: On the way to buy some screws.... - Admiral - 05-28-2017
I use an old plumbers reamer that works in a brace to round the inside of the socket, then a bench grinder to remove the outside mushroom. Worth doing if the chisel has life.