+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Incra Miter Gauge (/showthread.php?tid=7333784)
Incra Miter Gauge - Chuck in NC - 10-06-2017
I have a very old Incra V-27. I have a rigged aluminum fence (it is accurate but a pain to measure sometimes).
It was originally used on a Unisaw. I have since replaced the Uni with a Sawstop PCS.
I want to either buy an Incra fence and the flip shop stop and add to this or just buy a new 1000-SE or other miter gauge that would include the Incra fence and stop.
Recommendations?
RE: Incra Miter Gauge - woodworkersteve - 10-06-2017
(10-06-2017, 04:49 PM)Chuck in NC Wrote: I have a very old Incra V-27. I have a rigged aluminum fence (it is accurate but a pain to measure sometimes).
It was originally used on a Unisaw. I have since replaced the Uni with a Sawstop PCS.
I want to either buy an Incra fence and the flip shop stop and add to this or just buy a new 1000-SE or other miter gauge that would include the Incra fence and stop.
Recommendations?
Chuck, definitely not a pro, but in a similar situation, I bought a new 1000-SE. Used the original one as a dedicated 45* miter gauge.
Steve
RE: Incra Miter Gauge - kurt18947 - 10-06-2017
(10-06-2017, 04:49 PM)Chuck in NC Wrote: I have a very old Incra V-27. I have a rigged aluminum fence (it is accurate but a pain to measure sometimes).It can be useful to have more than 1 miter gauge. I use one on a band saw, router table, TS box joint jig etc. etc. Leave one set up for the table saw.
It was originally used on a Unisaw. I have since replaced the Uni with a Sawstop PCS.
I want to either buy an Incra fence and the flip shop stop and add to this or just buy a new 1000-SE or other miter gauge that would include the Incra fence and stop.
Recommendations?
RE: Incra Miter Gauge - EricU - 10-06-2017
I use my original PM 66 gauge all the time in addition to my incra. Cannot for the life of me figure out why the OEM gauge squeals so bad, so I was thinking about getting another incra. I would probably get a 1000 SE again, although the V27 might work better as a second gauge
RE: Incra Miter Gauge - CARYinWA - 10-07-2017
I have the 1000HD for the table saw. I have a V27 that I move around other tools like the bandsaw.