+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Two Way Mirror (/showthread.php?tid=7335426)
Two Way Mirror - Cecil - 12-10-2017
I cut down a tree, which was hollow. I would like to make an "infinity tunnel" by putting two way mirrors on each side of a cookie. I know I will need to add a light source, i.e. LED's inside.
Does anyone have any advise/watch-outs for working with two way mirrors?
What is interesting is, this hollow cookie appears to be drying without the radial cracking, at least so far, so good. I cut it in the spring. It has been drying outside all summer. So far, no cracks.
RE: Two Way Mirror - 1Spirit - 12-10-2017
(12-10-2017, 07:16 AM)Cecil Wrote: I cut down a tree, which was hollow. I would like to make an "infinity tunnel" by putting two way mirrors on each side of a cookie. I know I will need to add a light source, i.e. LED's inside.
Does anyone have any advise/watch-outs for working with two way mirrors?
What is interesting is, this hollow cookie appears to be drying without the radial cracking, at least so far, so good. I cut it in the spring. It has been drying outside all summer. So far, no cracks.
Several very good videos on you tube but I have not tried one yet. I have several very large tempered mirrors I want to make infinity tables out of