+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Tilting Shed (/showthread.php?tid=7338866)
Pages:
1
2
RE: Tilting Shed - Phil Thien - 04-13-2018
Gotcha Robert, yeah that is a good idea.
RE: Tilting Shed - JTTHECLOCKMAN - 04-13-2018
(04-13-2018, 10:32 AM)Robert Adams Wrote: Lift the building not the slab then cut treated sill plates to shim between the slab and building.
This was my first thought too. Self built by me and not store bought. This all came about because I was thinking of building a lean-to next to it to move some of the over crowding stuff in it.
RE: Tilting Shed - tomsteve - 04-13-2018
(04-13-2018, 02:18 PM)JTTHECLOCKMAN Wrote: I was thinking of building a lean-to next to it to move some of the over crowding stuff in it.
welp, seems ya have experience at building leaning stuff now.
RE: Tilting Shed - JTTHECLOCKMAN - 04-13-2018
(04-13-2018, 03:44 PM)tomsteve Wrote: welp, seems ya have experience at building leaning stuff now.
Yea I should have no problem with that.
RE: Tilting Shed - EricU - 04-14-2018
build the lean-to on the low side and push it back the other way.
My shed foundation is just 6x6es on compacted gravel, but fortunately it is going to be difficult to tell if it leans because of the siting.