Woodnet Forums
Escondido WW help? - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Escondido WW help? (/showthread.php?tid=7340807)

Pages: 1 2


Escondido WW help? - Gary G™ - 07-06-2018

Anyone in the Escondido, CA area want to make some reasonable money to help finish a project?
It basically amounts to making 16 half lap joints in 2 X 4’s: 2 stiles about 45” long and 4 rails about 7’ long.
Must be square and tight.
Thanks,
Gary


RE: Escondido WW help? - Anak - 07-07-2018

I am not in a position to be of any help, but I can suggest you try the San Diego Fine Woodworkers Association Craftsman List.

See if you can find a skills and reasonable location match on that list.


RE: Escondido WW help? - Fred Kingston - 07-07-2018

(07-06-2018, 08:36 PM)Gary G™ Wrote: Anyone in the Escondido, CA area want to make some reasonable money to help finish a project?
It basically amounts to making 16 half lap joints in 2 X 4’s: 2 stiles about 45” long and 4 rails about 7’ long.
Must be square and tight.
Thanks,
Gary

You can do those from anywhere... bundle'm up and UPS'em out there


RE: Escondido WW help? - Gary G™ - 07-07-2018

The material is already here though.


RE: Escondido WW help? - crokett™ - 07-07-2018

(07-07-2018, 04:57 PM)Gary G™ Wrote: The material is already here though.

I thought you were in Florida.  You don't own a circular saw and a chisel?  I've also done what you want with a handsaw, though that would take longer.


RE: Escondido WW help? - Gary G™ - 07-07-2018

My SIL didn’t have tools; we went shopping.
I’ve done 23 half lap joints—9 to go.
Most were done with circular saw, chisel and rasps.
We borrowed a router and I’m banging but it’s still hot—yesterday was 108; it’s only 102 right now!

This is me:

http://lumberjocks.com/projects/385721


RE: Escondido WW help? - Gary G™ - 07-10-2018

Still looking for someone who can complete 4 easy sets of half lap joints in Escondido.
Anyone know someone who wants to make a couple hundred dollars for a few hours work?


RE: Escondido WW help? - brewmaster - 07-11-2018

Small set of chisels, circular saw, and Amazon Prime?


RE: Escondido WW help? - Gary G™ - 07-11-2018

Don’t understand your reply?!?j


RE: Escondido WW help? - brewmaster - 07-30-2018

If SIL doesn't have the tools, maybe send some his way so he can do the work...