+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: WTB - Stanley 45 Cutters (/showthread.php?tid=7346271)
Pages:
1
2
WTB - Stanley 45 Cutters - David Katz - 02-07-2019
Must be able to sharpen (no pitting, etc).
Thanks!
RE: WTB - Stanley 45 Cutters - Carl Grover - 02-08-2019
I bought some cutters for my 45 direct from Stanley. They didn't have many left but there's another possible source. Also, Lee Valley has cutters that will work in a 45 but I think they are a little shorter.
carl
RE: WTB - Stanley 45 Cutters - GeorgeV - 02-11-2019
(02-08-2019, 09:09 AM)Carl Grover Wrote: I bought some cutters for my 45 direct from Stanley. They didn't have many left but there's another possible source. Also, Lee Valley has cutters that will work in a 45 but I think they are a little shorter.
carl
Yes, the Lee Valley cutters will work in the 45 and 55.
RE: WTB - Stanley 45 Cutters - Stwood_ - 02-13-2019
I've got 2 standard sets, plus some spares. I'll look over what I have tomorrow.
RE: WTB - Stanley 45 Cutters - David Katz - 02-14-2019
(02-13-2019, 11:45 PM)Stwood_ Wrote: I've got 2 standard sets, plus some spares. I'll look over what I have tomorrow.
Thanks!
RE: WTB - Stanley 45 Cutters - Stwood_ - 02-14-2019
David. I went through my spares and only have 4.
Three beaders and one straight.
And these do not have the typical stanley notch on topside of the cutter.
Thought I had more
RE: WTB - Stanley 45 Cutters - David Katz - 02-14-2019
(02-14-2019, 05:45 PM)Stwood_ Wrote: David. I went through my spares and only have 4.
Three beaders and one straight.
And these do not have the typical stanley notch on topside of the cutter.
Thought I had more
Thanks for looking. I need the notches as I wish to use them with my Veritas combination plane.
RE: WTB - Stanley 45 Cutters - Kansas City Fireslayer - 02-14-2019
Dave,
I’m pretty sure I have an extra set I can part with. IIRC, its the standard set of 21-22 cutters? Somewhere around there. I’ll dig them out tomorrow.
RE: WTB - Stanley 45 Cutters - Fred Kingston - 02-21-2019
(02-07-2019, 10:56 AM)David Katz Wrote: Must be able to sharpen (no pitting, etc).
Thanks!
David... Is this what you're looking for???
[attachment=16787]
RE: WTB - Stanley 45 Cutters - David Katz - 02-22-2019
(02-21-2019, 04:32 PM)Fred Kingston Wrote: David... Is this what you're looking for???
It is. Please IM me with the details, price, etc.
Thanks!