+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: close quarter drills (/showthread.php?tid=7347228)
Pages:
1
2
RE: close quarter drills - PVW - 03-24-2019
found a used milwaukee close quarter drill and a half inch milwaukee drill on e bay yesterday. Look well used but thought I'd give 'em a shot for $40.
RE: close quarter drills - AHill - 03-27-2019
Use some compressed air every once-in-awhile to blow out the dust on your drill. The dust from your sanding gets into the bearings and that's part of the problem. I have a Makita I've been using for 4+ years without any issues whatsoever.
RE: close quarter drills - PVW - 03-27-2019
(03-27-2019, 07:21 AM)AHill Wrote: Use some compressed air every once-in-awhile to blow out the dust on your drill. The dust from your sanding gets into the bearings and that's part of the problem. I have a Makita I've been using for 4+ years without any issues whatsoever.
Yeah, I usually blow it out every day
RE: close quarter drills - Arlin Eastman - 03-27-2019
I blow it out every time I sand to. I feel it keeps it cooler while running and will make it last longer. I know why I just do not remember.
